Mitsubishi Eclipse 4G Forums banner

2008 GT Eclipsw Part Out

5K views 42 replies 15 participants last post by  Jay 
#1 ·
Seeing as how my last part out went very well, except for when the junk guy took all my interior pieces and extra seats, I picked up another GT Eclipse to part out. Also decided to do this because im doing a manual swap for my car. Meaning I have absolutely everything for this car. The only thing I am taking is the wiring harness, the seats, the trans and the ECU.

The throttle body is set aside and Im selling it for $100 you pay shipping.

Intake manifolds ( I have two pairs, 2 upper and 2 lower) 250 a pair plus shipping. All cleaned and looking brand new.

Radiator $50 you pay shipping.

Tail lights are brand new so $75 for the set plus shipping

Third brake light has a crack so $25 plus shipping to whoever wants it.

I have two GT wiring harnesses 75 plus for a regular one and $100 plus shipping for the one I am currently using that is taped up and looks mighty fine

I also have two GT Automatic starters. The older one has less than 100k on it $30 plus shippigg akes it. The newer one on my car is $50 plus shipping

I also have two Automatic ECUS, both stock tuned, $60 each plus shipping

Also have an engine with 120k on it for $600 plus shipping which will be an ass load

Two auto trans. 120k for $500 plus shipping and one with 35k for $900 plus shipping. New trans is worth close to 2 grand after calling LKQ Which is where the trans is from. Similar miles

Ac is working so the condensor and ac unit together are $120 plus shipping.

Stock suspension $80 plus shipping (whole car)


As stated, I have almost everything including doors for this car for sale. If the item is not listen either ask in the post or PM and I will give you a price and let you know availability. More pictures upon request or if there is an item in question. I do have apps like snapchat, duo, and skype so if a video call to inspect the part is neccessary then just pm and we can go for there.

I live in Southern California if anyone would like to swing by and pick up parts

WILLING TO GIVE YOU EVERYRHING NECESSARY FOR A 2.4L TO 3.8L SWAP FOR $1600 (Mainly only for locals because shipping would be a pain for your wallet). I have personally done the 2.4l to 3.8l swap so I know exactly what you need.

Any questions hmu!!

Also, Admins if you want more pictures or proof just let me know and Ill do whatever is asked
 

Attachments

See less See more
7
#6 ·
Originalcarpost, I got your message but it says you are unable to receive pms

I was going to let the whole 3.8l swap go for $1500. Includes engine at 120k, trans at 75k, and everything else including linkage, cats, wiring harness etc. Best if you live in cali because shipping and engine and trans and everything will be a couple hundred bucks if not more
 
#8 ·
Im assuming the inner door skins are pefect as this car ha snever been in an accident and evrrything in the door was OE never been replaced. Ill ve home in q couple hours and post up some pics before i take it off. Also, what exactly is the item you are describing by the door jams? Any link you can post up so I can check it out?
 
#9 · (Edited)
I did a bad job describing it. I have inner door skins that have a broken tab, and contributes to noise when I open and close the doors. This is what my passenger side tab looks like after several attempts to plastic-weld it back together.

https://i.imgur.com/t3enTCx.jpg (not inserting inline because it's too big)

As you can see, it's still broken. I've tried to fix these things several times, different types of glue, then plastic welding without, then with a reinforcement screen. I was going to replace them with metal L-brackets, but if I can get a set of skins where this tab isn't broken, I can fix the problem and keep the car fully intact.

I would need both the driver and passenger ones. Both of mine are broken and the doors clap when I close them because this piece rattles. I would not need the door handles, the plastic cups they sit in, the door grabs, or the window switches.
 
#10 ·
Ok so from my understsnding, you need the metal door inserts that covers the whole door and the interior door panels if they are both in good condition correct? Ill see what both door panels condition are because they may have cracked up on the top but ill look and post some pictures
 
#11 ·
No my man, that's not correct. I only need the interior door panel, not the metal door insert behind it. This thing:

https://www.ebay.com/itm/Genuine-Mi...h=item3b10066d97:g:PzAAAOSw~Q9bFz8h:rk:1:pf:0

I would prefer to have all the little parts that are also attached to it, but I can pull them off my panels if you really want to separate them.

I got the hooks and grommets yesterday. Thanks for sending them so quickly. I'm going to glue the broken hook before I put it in but I put the good one in the passenger side so I don't have to look at those fucking holes anymore every time I back out.
 
#12 ·
Sp the interior pieces are honedtly like a 6 out of 10. They have some scuff marks but they are in tact and in one piece.this is the driver side.
 

Attachments

#13 ·
The passenger side has one spot where the screw broke the housing. Theyll need some work. But ill sell them for $50 for both plus shipping
 

Attachments

#14 ·
Also, I have a set of tail lights that are OEM New that the previous owner had just installed. Im selling them $60 for both plus shipping
 

Attachments

#21 ·
The ones from this car are, but i believe the front one is bad. Whoever installed the valve cover gasket fucked up doing it, somehow, and so oil leaked out and got into the cat which is why I believe it to be bad. The one in the rear however I presume is good and the one on the exhaust is good as well
 
#27 ·
Do you have the seatwarmers? I would buy the buttons and mechanism off of you for both seats.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top