Club4G Forum : Mitsubishi Eclipse 4G Forums - 2006-2012 Eclipse Authority

Club4G Forum : Mitsubishi Eclipse 4G Forums - 2006-2012 Eclipse Authority (https://www.club4g.org/board/)
-   Member's Rides (https://www.club4g.org/board/members-rides/)
-   -   Road renegade build thread (https://www.club4g.org/board/members-rides/100809-road-renegade-build-thread.html)

ROAD RENEGADE July 6th, 2017 04:03 PM

Ive been lazy guys and its been a couple months sense I welded up my 3in exhaust. Please leave feed back of any kind. Thanks

https://www.youtube.com/watch?v=srcOIm2tmxE

https://www.youtube.com/watch?v=iOc7wWMHvGE

https://www.youtube.com/watch?v=gE9MJopYqcU

ROAD RENEGADE July 6th, 2017 04:12 PM

4 Attachment(s)
Attachment 69673

Attachment 69681

Attachment 69689

Attachment 69697

4GECLIPSE27 July 6th, 2017 11:39 PM

Nice! It sounds much better than mine. I'm running a similar setup.

I have RRE headers, a 9.5'' vibrant resonator where the 3rd cat used to be, through a 2.5'' pipe back to a topspeed pro1 axle-back.

It sounds ok, but I'd like to put a muffler further up the exhaust after the resonator and put a nice exhaust tip on in place of the axle-back.

Also, I am getting a weird rattling noise during driving and lightly revving at standstill. From 1800-3000 rpm, when letting of the gas, I get a buzzing noise, like a heat shield is vibrating. I took them off the y-pipe thus far, but still get the noise.

Any ideas?

DR3 July 7th, 2017 01:01 AM

Quote:

Originally Posted by ROAD RENEGADE (Post 1836657)
Ive been lazy guys and its been a couple months sense I welded up my 3in exhaust. Please leave feed back of any kind. Thanks

https://www.youtube.com/watch?v=srcOIm2tmxE

https://www.youtube.com/watch?v=iOc7wWMHvGE

https://www.youtube.com/watch?v=gE9MJopYqcU

Finally i've been waiting for this

SuperEvilnine July 7th, 2017 02:12 AM

Nice sound man👍👍👍😺

Sent from my LGLS991 using Tapatalk

ROAD RENEGADE July 7th, 2017 08:41 AM

Quote:

Originally Posted by 4GECLIPSE27 (Post 1836753)
Nice! It sounds much better than mine. I'm running a similar setup.

I have RRE headers, a 9.5'' vibrant resonator where the 3rd cat used to be, through a 2.5'' pipe back to a topspeed pro1 axle-back.

It sounds ok, but I'd like to put a muffler further up the exhaust after the resonator and put a nice exhaust tip on in place of the axle-back.

Also, I am getting a weird rattling noise during driving and lightly revving at standstill. From 1800-3000 rpm, when letting of the gas, I get a buzzing noise, like a heat shield is vibrating. I took them off the y-pipe thus far, but still get the noise.

Any ideas?


Sorry I don't know what your vibrating sound may be. I know I have a slight crackle sound when I let off the accelerator, so I think I will need to replace my flexpipe which is no biggy sense ill end up welding a y-pipe eventually.

4GECLIPSE27 July 7th, 2017 05:00 PM

Ah, not many do a custom y-pipe so that's cool.

I went by an exhaust shop today and they couldn't find it either.

I guess I will have to play around more with things under the hood and under the car.

ROAD RENEGADE July 17th, 2017 11:31 AM

1 Attachment(s)
Rockin the new skipps I picked up yesterday! ESR SR07's 18x9.5 all the way around. the wheels are +22 offset and they just ever so slightly stick out from the fenders (close to 1/2in)

Attachment 69881

Charlesdcann July 17th, 2017 12:05 PM

Quote:

Originally Posted by ROAD RENEGADE (Post 1838369)
Rockin the new skipps I picked up yesterday! ESR SR07's 18x9.5 all the way around. the wheels are +22 offset and they just ever so slightly stick out from the fenders (close to 1/2in)

Attachment 69881

Looks good dude!

Sent from my SM-G930P using Tapatalk

ROAD RENEGADE July 26th, 2017 01:15 PM

1 Attachment(s)
I have a Tial QR bov for the up coming Ripp project, and I've heard that Tial is a really good brand of BOV's but super quiet especially under low boost (going to run 6psi). So after some research, a company called Go Fast Bits makes BOVs and bov accessories such as trumpets. Me being a machinist I said hell with buying a trumpet, I'll make my own. So here she is. The trumpet is about twice as long as the original so hopefully is will make a difference in the sound.

ROAD RENEGADE August 9th, 2017 07:43 PM

1 Attachment(s)
Started working on my port and polish job. This is the lower part of the intake manifold. I bought spare parts so my Eclipse isn't dead in the water while I tackle this job. If you are interested in obtaining a extra plenum/lower manifold/throttle body/valve cover let me know. I will have these parts listed for sale soon.

Justringfellow September 6th, 2017 01:48 AM

Quote:

Originally Posted by ROAD RENEGADE (Post 1838369)
Rockin the new skipps I picked up yesterday! ESR SR07's 18x9.5 all the way around. the wheels are +22 offset and they just ever so slightly stick out from the fenders (close to 1/2in)

Attachment 69881

Wow. So clean. So jelly:rant2:

SuperEvilnine September 6th, 2017 03:16 AM

Quote:

Originally Posted by ROAD RENEGADE (Post 1842585)
Started working on my port and polish job. This is the lower part of the intake manifold. I bought spare parts so my Eclipse isn't dead in the water while I tackle this job. If you are interested in obtaining a extra plenum/lower manifold/throttle body/valve cover let me know. I will have these parts listed for sale soon.

Shiny...envy

SuperEvilnine September 6th, 2017 03:16 AM

Quote:

Originally Posted by Justringfellow (Post 1846970)
Wow. So clean. So jelly:rant2:

You have the cleanest

SuperEvilnine September 6th, 2017 04:38 AM

Quote:

Originally Posted by SuperEvilnine (Post 1846994)
You have the cleanest

Well..thank you

SuperEvilnine September 6th, 2017 04:39 AM

Vs u...no

Zkdawg2 September 14th, 2017 06:36 PM

Did y'all fare out Irma well? Hope the 4g is all good. Hope y'all have power back.

ROAD RENEGADE October 18th, 2017 04:22 PM

1 Attachment(s)
Hey guys sorry for being a little slow on the forum. I've been in the hospital for awhile and things are turning out for the worst in life haha but the wheel in the sky keeps on turning. Anyways, as you know I am a incredibly slow modder but here's a sneak peek at my progress. I have my man Hackish working on my FI tune so as soon as I recieve the file ill go ahead and install my RIPP SC i've had for the last 3 damn years haha

I also have all my supplies for my widebody project i'm going to start. Ill make sure to document the process as I continue. Attachment 71305

DR3 October 18th, 2017 07:22 PM

Get better soon. Sincerely the guy who's been waiting way to long to see your SC build :D

ROAD RENEGADE October 27th, 2017 03:11 PM

4 Attachment(s)
Heres some new photos. Nothing fancy but I'd thought id show the engine bay a little more. Also just got done installing my Mishimoto Oil catch can.
Attachment 71393

Attachment 71401

Attachment 71409

Attachment 71417

SuperEvilnine March 7th, 2018 11:09 PM

Shes looking clean man, thats next on my list, cleaning up the engine bay. I nominated u for COTM, good luck!

ROAD RENEGADE March 13th, 2018 01:37 PM

Started installing NGK one step colder spark plugs, 440CC fuel injectors, lower ported n'polished manifold. Also I'm working at my water pump and timing belt sense I just hit 80,000 miles. After all this ill bolt up the SC and be heading to Orlando for a final tune! After 4 years of gathering parts its finally happening.

ROAD RENEGADE March 20th, 2018 08:15 PM

5 Attachment(s)
Attachment 73402

Attachment 73410

Attachment 73418

Attachment 73426

Attachment 73434

ROAD RENEGADE March 20th, 2018 08:18 PM

5 Attachment(s)
Attachment 73442

Attachment 73450

Attachment 73458

Attachment 73466

Attachment 73474

DeAtHsWhIpLaSh March 20th, 2018 09:21 PM

I dig it!!!

ROAD RENEGADE March 20th, 2018 10:15 PM

Thanks David, it took me awhile to do the water pump and timing belt but I feel confident after completing it. Now its time to finish this dream of the SC build :peace:

SuperEvilnine March 22nd, 2018 09:04 AM

Very nice[emoji106][emoji106][emoji91]

ROAD RENEGADE May 18th, 2018 08:30 AM

5 Attachment(s)
Attachment 74929

Attachment 74937

Attachment 74945

Attachment 74953

Attachment 74961

ROAD RENEGADE May 18th, 2018 08:38 AM

4 Attachment(s)
Attachment 74969

Attachment 74977

Attachment 74985

Attachment 74993

ROAD RENEGADE May 18th, 2018 08:41 AM

2 Attachment(s)
Attachment 75001

Attachment 75009

ROAD RENEGADE May 18th, 2018 08:50 AM

Concept photos
 
3 Attachment(s)
The first 2 photos have custom wheel spacers on. I just put one on to see how far the wheel puckers out. Its all in preparation to fabricate a wide body project. I wont be able to start anytime soon till my father finishes the 78 El Camino project. The last photo is a concept Audi R8 photo i'm referencing. I want to make the wide body similar.
Attachment 75017

Attachment 75025

Attachment 75033

now4g May 18th, 2018 11:06 AM

Pretty Damn Awesome!

SuperEvilnine May 19th, 2018 05:10 AM

I wish you wish, r u gonna win aCOTM this year? I'll send satoshis for you..lol

ROAD RENEGADE May 19th, 2018 10:02 AM

I know! When I die I'm gonna ask god how come it took so long for me to be COTM. Only he'll know rip

Plain Jane May 19th, 2018 10:17 AM

Quote:

Originally Posted by ROAD RENEGADE (Post 1888346)
I know! When I die I'm gonna ask god how come it took so long for me to be COTM. Only he'll know rip

Can't be much worse than my COTM efforts, took me two years to finally win one, and that was only because nobody else entered that month lol

DR3 May 20th, 2018 12:06 AM

Quote:

Originally Posted by Plain Jane (Post 1888362)
Can't be much worse than my COTM efforts, took me two years to finally win one, and that was only because nobody else entered that month lol

PJ taking out the competition :lmao:
Hey a win is a win regardless on how you get it.

SuperEvilnine May 21st, 2018 12:37 AM

Alright, enough crying, someone win ready

Sabertooth^2 May 21st, 2018 08:43 AM

Only time will tell ;)

On the 30th or whenever I feel like it (specific enough?) I'll close the voting as usual

dotd0t June 21st, 2018 10:52 AM

So speaking of your tuning. Who is gonna be tuning it? Is it completely installed onto car yet?

ROAD RENEGADE June 21st, 2018 11:43 AM

I have everything installed on the car. Everything has been looked over several times. Michael and I have been fight to knock the majority of the problems out but it's been a long 3 months. It doesn't help that I keep ending up in and out of the hospital. But I'm having all kinds of issues. After we get everything settled I'm thinking about taking her to Kings Performance in Orlando.


All times are GMT -5. The time now is 06:13 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Friendly URLs by vBSEO
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Ad Management plugin by RedTyger