Mitsubishi Eclipse 4G Forums banner

20's

  1. 4G Eclipse GT/SE Specific
    Hey everyone, I have a 2007 Gt, and i just wanna get straight to it here. About a week ago i went out for a spin in the car, had to run some errands and what not, everything ran fine and nothing happened out of the ordinary here, came home and parked the car. Next day, After some severe...
  2. 4G Eclipse GS/SE Specific
    Hey everyone, I have a 2007 Gt, and i just wanna get straight to it here. About a week ago i went out for a spin in the car, had to run some errands and what not, everything ran fine and nothing happened out of the ordinary here, came home and parked the car. Next day, After some severe...
  3. The Lounge
    In the 60's today, not a cloud in the skys, so I took my Eclipse Gt out and let her go through some great mountain curves at 10,000 ft. elevation. What a great way to put the long winter days behind. Tomorrow snow and ice, with the highs in the 20's. so I'll keep her in the garage until the...
  4. 2006-2012 Eclipse (General 4G)
    So i'm finally getting around to getting my lowering springs but before I order them I want to clarify a few things, 1 being am I gonna have any issues at all with doing this drop? its 2.5 in front 2.6 in the rear and im already on 20's.. 2006 gs stock height. Secondly what do you guys think...
  5. 2006-2012 Eclipse (General 4G)
    I'm going to lower my car, its gonna happen. I just don't know how much.. I wanted the tein s-tech but my front tire is like right on the bottom of the coil I guess? im not sure what its called, ill take a better pic and post it here in a few min... My car is on 20's so my wheel gap isn't to...
  6. Motorsports (Racing)
    So I got a chance this morning to have some fun with a new friend from college. So this took place just right north of I-380 on the service road of U.S. 75 in McKinney, Texas. Ran quite a few rolls. From 15,20,25, and 30. Multiple times just on the service road on either side. Eclipse GT 6spd...
  7. Wheels, Tires, Brakes and Suspension
    OK guys. Im new to the forum and this is my first post. Just got my 06 GT the other day and noticed right away that something didnt look right. Long story short its the gap between the tires and the body. After doing tons of serching and reading on here im trying to decide between buying the...
  8. Member's Rides
    Just got her finished, 20" Katanas on Nexen n3000245/35/20's w MR Coilovers.
  9. Member's Rides
    Well here is my new setup on my red rocket i got rid of my 20's the teal color ones. And i bought sum xxr 526 18x9 in front and 18x10.5 rear here are sum pics of how the rocket sits now. So check it out and tell me on how it looks next is sum coil overs.
  10. New Members Forum
    Hi this is my first post I just bought an 06 eclipse gs uv blue tinted the glass and now Im looking to buy some rims prob 20's in a web design does anyone have any suggestions?? Thanks a lot
  11. Photoshop Requests/Tests
    hey PS'ers if anyone can get a chance can you PS these rims? http://club4g.org/board/members/angelthrust-albums-ps-picture18193-katana-rc12-matte-blackps.html the areas with the yellow lines, paint solar yellow, the area with the white lines, paint gloss black? then switch so i can see it...
  12. Wheels, Tires, Brakes and Suspension
    is there a mathematical formula to describe the relationship between the weight of your wheels and (simulated) horsepower loss/gain? i find myself looking for some rims and entering the timeless, ageless question of 18's vs 20's... 18's perform better, 20's look better. this is because of...
  13. Other cars
    If this doesn't draw attention, I dunno what will. Honestly, if the guy didn't have all those huge ass speakers in each door and on the dash, and had 20's, or hell, even 22's instead of 30's this might be one sick ass ride. I mean, it's a freakin ZL1. This thing is a beast of a machine...
  14. Member's Rides
    So it's a shame that my ride thread is being started under these circumstances, but I guess I'll start with an introduction. I've had my car for about a year. Before my eclipse I had a 2004 Toyota corolla s. It was a good gas saver and was nice, but seemed like more of a chick car. I did what...
  15. Automotive For Sale/Wanted
    I bought my 2006 GT last week, and it came with rims that I don't care for. If anyone is interested, I would like to do a straight trade (preferably at a house with a garage, mine or yours). I can't afford to put different rims on it and then sell these, so hit me up with a message in this...
  16. Wheels, Tires, Brakes and Suspension
    right now i have MSR number 42 Chrome 20 inch Wheels Rims for wheels 20x7.5 and 255/35 zr20 tires... wanted to know what would be the best spring to drop it closest to the wheel without rub... any input is helpful thanks! i know everyone on here says get rid of the 20's but i like the way they...
  17. Wheels, Tires, Brakes and Suspension
    I just bought a new Eclipse, and wanted wheels for it. I was hoping to fit 20's but I'm not sure that they will fit. I read we can use a 10 inch wide rim with 35mm offset on the back but only 8.5 inches on the front? The measurements for the rims I was looking at are made in both 20x10 and...
  18. Problem Reports
    I went to get gas about 15 mins ago, I opened my fuel door and it seemed a tiny tiny bit frozen shut but barely took much effort at all to open. I went to shut it and noticed it shut very weird, it is now very floppy when I open and close it. It is in the low 20's right now outside, is the black...
  19. 2006-2012 Eclipse (General 4G)
    ok im not gonna do the whole chrome thing now that you guys talked me out of it, i found some 20's yea i know! lol.... but their machined with black in it to go with my front lip and roof, i did another photoshop job, they favor oranges eclipse and his looks nice only problem is it say it...
  20. 2006-2012 Eclipse (General 4G)
    super easy to install, theirs indentions on both sides of hatch where oem spoiler goes, so just get a 5/16 drill bit, and drill upward to get it started than lower hatch and drill down to make hole, this way you dont have to use the t strips, put some masking tape on the hatch decklid to...
Top