block

Has anyone purchased the surtrack cv axles for automatic transmission? I did an when I got them I was already iffy about installing them because the factory axles are double the weight of the surtrack axles but I went ahead an installed them an now feel some heavy vibration, I only drove around...

Aren't we supposed to get a code when we disconnect the knock sensor? I disconnected mine and have no code even drove around the block. Sent from my SM-G960U using Tapatalk

07 eclipse gs got 76,700 mile replace timing belt couple hrs ago .. I start the car up and run it for about a block suddenly the engine cut off .. there good crank it just won’t start ..I need help ASAP .. thank in advance and sorry if it cost trouble ...thanks again

This post is old. Find the updated one at the link below https://www.club4g.org/board/automotive-sale-wanted/120507-4g69-build-kits-pistons-rods-bearings-studs.html#post1915771 Hey guys, So first up in my series of kits I'll be selling, I have 4G69 engine build kits! These will be to support...

My parts supplier is doing a sale for Black Friday. Details are on his Facebook page while his website is under construction. He's who I used as my source for building my 1000+hp capable 4G69 block, and is who I get my turbo related stuff from now. He doesn't list his full inventory...

There isn't a single build in the world like this one. This car is based on a 2nd gen Mitsubishi Eclipse platform, and was built by Full-Power-Motors racing team for the sole purpose of breaking records in the FWD category of Russia's national drag racing championship. What makes this car unique...

Woops I put this in the wrong area. ;O Sorry! I am putting this here so anyone looking for help with their Transaxle can come here. Manual Tearstone Manual - Automatic Transaxle Page 23A-4 - Transaxle Page 23A-401 - REMOVAL AND INSTALLATION <4A/T> Page 23A-409 - REMOVAL AND INSTALLATION...

What makes Fifteen52 wheel so popular? You can address this question to Magnus Walker, famous Porsche customization specialist or Ken Block, world-renowned rally car racer and the man behind the Hoonigan Gymkhana drifting videos. The answer is simple. These rims look great and perform even...

I'm attempting to do a full coolant flush on my 2008 Eclipse GT tomorrow and as the manual states you don't just drain the coolant from the radiator. There are actually two bolts on the engine block, both front and back, to drain all the fluid out completely. My question is, is it necessary to...

so im new to the group, and not sure if this topic has been covered, please send the thread if so. i bought a 2001 gs 5 speed, for 400 running, w/o dtc codes, had a slight idle prob after warm, and pulling up to a red light car had to be in neutral and the throttle had to be feathered to keep...

I was told my valve seals need to be replaced due to smoke anyone that can help me probably save some money or ideas? My mechanic told me it would b $1300 do they gotta take the block out? Sent from my iPhone using Tapatalk

Running into a wall here, Been through the manual and it only talks of valve stem seals as a fresh build with the head off the block. Does anyone know how to properly get the rockers out of the way while you replace the valve stem seals?

Okay, I will openly admit I made this account purely to ask this question and hopefully get help, I apologize if this has been asked before but I couldn't find a thread. I am a recent purchaser and owner of an 06 eclipse gt, and I love it. I can't list all the upgrades because she's been through...

Anyone had any luck cleaning their engine bay? I was looking around on the forum and haven't seen any pictures of peoples engine bays looking super clean. I'm not too proud of what mine looks like... Engine block is rusting and peeling.. Piping and body on the inside is very dirty, you know...

I have a 2006 eclipse GT that I purchased as a weekend project car. Here is the issue and what I have done. The car will start and run but it will seem as it is running out of fuel then shut off. This can happen at any point sometimes within 30 seconds of starting or after driving for 2 miles...

My eclipse just started making a new noise that seems to be coming from the engine block behind the exhaust manifold. It's kind of a rhythmic marble rattling kind of sound. checked heat shields and pretty sure those are not the problem. could it be the timing belt or the balancer timing belt...

So i've looked and red some topics and I just kinda want a more clear cut answer I've got a GT. If I get the obx headers is this all I will need to do to have the car and pass emissions. Extend the wires for the o2 sensors Use double spacers or fowlers on the rear 2 sensors. Add a bung for the...

After a family emergency with my Grandmother passing away, I've been able to get back on the horse to start working on my car again. I bought glowshift's triple gauge pod along with a wideband gauge, vacuum gauge and a 12 volt battery gauge. Then we lost a coworker at the automotive repair...

So I haven't been able to electronically lower my top in months and it's frustrating. I checked and apparently I have a leak of hydraulic fluid coming from the hydraulic rotary actuator (pretty sure that's the name). It basically looks like a large aluminum block that has hydraulic cables...

I have an 07 gs motor for sale, odometer shows just under 200k but I just pulled the motor apart to the bear block and replaced all the bearings, gaskets, and rings. Motor runs and sounds great. I am putting some miles on the new rings so they seat properly so it won't be a 0 mile motor but a...