brace

For those who have yet to suffer through this, a few tips I learned through my experience! – Earlier this year, we bought the car used, knowing it was from up north and was rusty underneath. The only real problem we’ve had so far was the fuel tank started leaking from the two vent lines on top...

Anyone have one they want to part with or know a place where you can still get one?

Hey guys, I'm trying to install a strut brace however for some reason it seems like there's bolts that are doing nothing in the way of the boot for the brace. I'm new to this, so it may be something obvious I'm unaware of. But does anybody know what these bolts are/if I can remove them...

Want to buy Tanabe Front Under brace. Hard to find these now a days.

SOLD

It's been awhile sense I've listed these braces on here. I just did a new ebay auction for the braces. Check it out at the below link. They are $35 a set. This does both doors and includes ship in the US 4G Eclipse Interior Door Pull Supports | eBay

Dental plan! Progress rear bar Tanabe STB Tanabe UBB Yeah or nah?

Hey guys, I have some parts to get rid of. I took these off as the car evolved into what it is. I completed my build and don't need these anymore. They would normally sit in Smoag's hoard garage for eternity, muahahahaha!...But I gotta buy new hockey skates that are way more expensive than I...

I am currently trying to find out what are the "bolt" specifications for the bolt that goes in through the Underbrace to lower control arm so that i can upgrade it to a better quality /more tensile strength one. Im hoping someone out there upgraded their bolts and not used the oem one. Id...

Hey guys. I ordered one of the DNA Motoring strut braces off of ebay. The price was pretty good, and it looked a lot stronger than some of the toothpick bars. I did some research and read that even though it says it is for the 2006-2012 Eclipse GS, it doesn't fit right. By looking at the...

I've been asked by several to make the rear body braces for our cars. So I have done the research and am now able to make these on request. The first batch consisted of three units with one left as of this post. I can and will make more upon request. I am not a business. It's just me and a...

All Weather Floor Mats New $70 (Shipping included) Carpet Floor Mats New $ 60 (Shipping included) Trunk Mat without sub New $60 (Shipping included) Eibach " Anti-Roll Kit (Front Sway Bar) New $125+$15 (shipping(estimate)) TANABE Under Brace (Front) New $90+$15 (shipping(estimate) OBX Long Tube...

I am looking for: 4g69 valve cover upper tie bar side upper tie bar brace any other engine bay components you have just let me know.

Okay i'm gonna tackle this rear seat delete. Im gonna attempt to fab up my own because i'm a broke college kid... So I've got step one down.. remove the rear seat and seat belts. so once I got that pulled out I vacuumed and cleaned it up and covered it with my girls blanket she keeps in the...

4G Door Pull Supports OK, After a month of trial and error I have completed the prototype of my door pull support. Not only does it completly hide within the stock door pull, but in my testing it prevents future breaking of the door pull. It does this by adding a steel brace and relocating...

Looking for anyone who has the Medave rear brace bar that doesn't want or need anymore. Long shot but I can't get in touch with Medave himself to see if he could fab up another batch so hopefully someone has one they aren't using. :D

So I heard a while back that one of the sway bars did alot for the car. I can't remember if it was front or back that made the biggest improvement . Anyone know ? Had been told that if you run after market sway bars with long tube headers they rub . I had heard a couple times the under brace...

First up is a set of V2 25mm spacers with hardware, $180 shipped or $90 a pair plus shipping. Next is a Tanabe strut tower brace, SOLD. Front under brace, bolts to the front side of the control arms, SOLD shipped. Rear Eibach sway bar, bushings are in great shape, $130 shipped...

75 shipped for the tanabe, 45 shipped for the resonator (off of gt catback )

I have a bunch of misc items in the garage that i need to get rid of. I am in Canada btw and shipping is negotiable Tanabe Strut Tower Brace: $75.00 AEM FIC w/ software but needs Brian's harness: $300.00 AEM UEGO w/carbon fiber housing (sorry no sensor): $80.00 I have lots more goodies...