Mitsubishi Eclipse 4G Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 178 Results
  1. Wheels, Tires, Brakes and Suspension
    Recently I have installed Brembo brakes from evo x (front) and evo 9 (rear) Required : 1) New wheels (8.5w, offset 38) i.e evo x compatible wheels. Don’t like spacers etc … 2) Brembo callipers, pads, rotors, hoses and calliper bolts. Oem eclipse hoses are to short for such a setup. That’s whyI...
  2. Wheels, Tires, Brakes and Suspension
    Hey guys, so I've got a set of Brembo calipers, some of them have the bleeder nipple, some are missing them, but none of them have the fitting for the metal oil brakeline that connects the front and rear of the caliper. What would this fitting be called? Or is there another I could make work...
  3. Automotive For Sale/Wanted
    Might anyone be interested in a used set of Brembo Evo X calipers? Some of the clear coat is coming off but besides that that are fine. Ill replace the seals and rebuild the calipers before shipping. Im trying to see all who might be interested. I would be willing to ship for $750 This is a...
  4. 2006-2012 Eclipse (General 4G)
    Hey guys, so I have the opportunity to buy some factory Brembo brakes from a 350z and I'm curious if they would fit on an 06' GT with Evo X BBS rims? Or am I limited to the Evo Brembo brake factory kits?
  5. Do It Yourself Guides (Howto)
    AWD setup: - mitsubishi endeavor rear crossmember - mitsubishi endeavor rear diff (3.312 ratio) - mitsubishi endeavor rear driveshafts - mitsubishi endeavor rear hubs - mitsubishi evolution 9 awd 6 speed manual transmission (6wmaa) - mitsubishi evolution 9 clutch - mitsubishi evolution 9...
  6. Automotive For Sale/Wanted
    I will post pictures if anyone is interested. I'm looking to sell my front and rear GT brakes with the oem brake lines, drilled and slotted rotors, and brake pads. I think i'm gonna do the Brembo upgrade but not if I cant sell my OEM brakes. Brakes along with the lines are factory with...
  7. Wheels, Tires, Brakes and Suspension
    On here people say evo7-9 basically fit if ive read right but was wondering what needs to be done to get to fit, i have aftermarket drag dr34 18" rims on the car. But looking for what parts are needed for the swap. I tried reading some of the stickys and searching but was still unclear as to...
  8. New Members Forum
    hey, my name is nick and im a full time mechanic and a part time bouncer i bought an 07 eclipse gt spyder from my buddy a couple of months ago. i helped him do a lot of the work and mods to it as well. 141k miles, 6speed MODS: K&N Typhoon Intake Throttle Body spacer Urethane suspension...
  9. Current Car Of The Month
    Congratulations to Serg for Car of The Month. Modifications Engine: Wiseco pistons STD Bore 95.0mm, Stroke 90mm, CR 8.5, Pin 22mm, BC rods Sportsman Series w/ARP2000, ACL bearing, Tial blowoff, twin Tial wastegate, twin GT3071, MADcustoms intake, MADcustoms Exhaust, XO2 intercooler...
  10. New Members Forum
    Hello everyone , I own Mitsubishi Eclipse GS 2007 about 4 years. Now i want swap the stock breaks to EVO 9 brembo breaks . So i need get the new wheels for winter driving, because summer wheels too good for russian winter . Can you tell me which wheels parameters is OK to fit brembo breaks...
  11. Automotive For Sale/Wanted
    set of rims for sale stock rims with stock lugs 18x8 +45 offset $200 (center caps not included) Stock 18 Inch Rims For Sale Photos by Keyes19 | Photobucket Chrome Center Caps as pictured above were purchased from Mitsubishi for $17 each, and i can provide paperwork if necessary. i am willing...
  12. CariD.com
    Brake rotors can wear unevenly or become slightly warped over time, compromising your braking performance. Upgraded components ensure both quicker acceleration and quicker stopping time. When looking for new high-quality replacement brake pads, it is better to choose a product that will surely...
  13. Automotive For Sale/Wanted
    Hey there! I recently bought an extra set of the Brembo Calipers and I like to sell them to people whos looking to convert to these big boys brakes. It comes with mounting bolts/washers, brake pad clip/pins, bleeder screws, stainless steel braided line by Goodridge and brake pads. Only problem...
  14. Wheels, Tires, Brakes and Suspension
    Hey guys I have a problem with one on my brembos I recently installed Evo8 Brembos on my 4G. I had them powder coated and rebuilt by Justin at Detective Coating. He has done a great job by the way. Well my driver side outer bottom piston has developed a leak its leaking from the piston. I...
  15. Wheels, Tires, Brakes and Suspension
    Hi...it's time to change my stock rims :wiggle:....Have shortlisted two 19 inch rims but I can't decide which one to select.... 1) MOMO Ten-S (One on the eclipse)... Courtesy Club4g member J-ROD This is my first choice....But the width is only 8 :doh: (I want 8.5 actually) and the offset is 38...
  16. Automotive For Sale/Wanted
    I have a bunch of stuff left over from the past couple months that I don't need anymore. Everything is obo. Payment will be sent to my paypal and buyer pays paypal fees: [email protected] Gsx spoiler painted in Pure Red only used for a out 6 months. Has vinyl on the top covering a few...
  17. Member's Rides
    I think its time for a new ride thread. I've never named a car before. But I think this car needed a name. Her name is Kaiju. (strange creature) 464whp 439tq And still going for more. engine Ross pistons BC rods ARP head studs ARP main studs Cometic head gaskets Custom valve springs...
  18. Wheels, Tires, Brakes and Suspension
    I came across this earlier, for those of you (and about to be me! :runaway:) running brembos, Rockauto has yet again KILLED it with pricing 4 rotors and 8 pads- $199 2006 MITSUBISHI LANCER Rotor & Brake Pad Kit They also have reconditioned calipers for $800, which isn't a bad price considering...
1-19 of 178 Results
Top