Has anyone purchased the surtrack cv axles for automatic transmission? I did an when I got them I was already iffy about installing them because the factory axles are double the weight of the surtrack axles but I went ahead an installed them an now feel some heavy vibration, I only drove around...

Hi all, 10 years ago when I bought my eclipse (3.8L V6) I had an Eibach lowering springs/kit installed. I just recently broke the rear passenger spring. The mechanic said I'd have to make sure to get the same size replacement spring. The problem is I can't remember the size of the springs...

Trying to remove wheel hub and bearing to replace got all bolts out but hub is basically stuck I’ve tried penetrating oil and hammering to no luck what can I do to remove this without getting a shop to do it? Should I just keep hammering it it hasn’t even broke a crack in between the two pieces...

Hi there, I had an issue closing the convertible top on my 2011 Spyder GS a short while ago. First one of the flaps by the back seat wouldn't go down, causing the top not to close. I had a helper close that flap and when I went to close the rest of the way a piece of plastic was ejected from...

Dammit. Okay. I accidentally broke the red wire (for the aux cable) and bent the damn harness trying to get the pin out (you can see what I mean in the picture). :facepalm: I was able to shave the coating and shove the wire back in there. Harness clicked and it's staying in there (though a bit...

Alright so my hood latch broke last week, and I am unable to find a replacement anywhere that ships to Canada. Was wondering on people's thoughts of installing Locking hood pins in its place. Hood is the OEM steel hood not a carbon fiber or Fiberglass.

I almost didn't get to rent a harmonic balancer removal tool today from orielys because I broke the social distance rule. :69: they are serious! Yall be safe out there. Im a newb on here but plan to be as useful of a member as I can be while I own a 4g motor. I feel like I put a lot of...

I am having a problem replacing my clutch fluid. I followed the Shop Manual instructions and I can't seem to get the new fluid to go into the Master Clutch Cylinder. The manual says, open the bleeding screw, hold the clutch pedal down, close the bleeding screw, release the clutch pedal and then...

Coming up soon I will have my tax return, and I'd love to buy a GS Manual. I have a GS Spyder Auto and I think I know enough about these cars to buy another one that I want to keep nice and barely driven. Even if it has a bunch of miles, and things are broken, that's fine. I'm just really...

Hi Guys...Son was driving Spyder and broke an axle. Thought it was transmission, and I wasn't around so I picked up a completely rebuilt one with new torque converter. When I had it delivered to mechanic told I was lucky it was only axle...so I now proudly own a rebuilt I don't need. If anyone...

Welp, after 220k miles with just routine oil changes and maintenance it decided it had enough. A few months after I gave it a fresh tune up too. Driving to work on Friday, It all of a sudden started mis-firing and knocking bad. I immediately pulled into a parking lot and as soon as my foot...

Was told my transmission was shot after getting stuck on side of road. Picked up a completely rebuilt trans with new converter to have installed. After car towed to mechanic it was just a broken axle. Rebuilt never installed transmission. My loss is your gain....$900.00

Hello, I braked hard in my car and now I have a low rubbery creaking skipping sound.. Taking it to Midas tomorrow, but so far my friends have looked at it three times and can't figure it out. Adjusting my brake hardware on the front passenger wheel made it quiet for a couple days but it came...

Hello all, I have a 2007 GT Coupe. I am trying to get a few things fixed on it to make it look and feel better, and I've run into a snag. I know this will sound crazy, but I am trying to remove the climate control unit to open it up and put in a new Max A/C Recirculate button. The old one has...

Hello, can anyone help me identify this part. I cannot seem to find a replacement it broke on both ends. please see pictures attached

I purchased a 2008 Eclipse with the convertible top not working . The 2 pieces of the framework right and left are about a foot long made of cast aluminum and attach to the forward bow at the windshield are broken in half . Anyone know what could cause them to break , seems like it must of been...

I have a 2006 eclipse GS (4 cylinder) 5 spd, that is approaching 100k will be there by next year. What needs to be done? I have had the car since 78k miles in that time no timing belt or major maintenance has been done. Obvous stuff like brakes, coolant and little things like that but no major...

Hey guys! I'm buying a 2008 eclipse and notice that the seat lever is broken (actually the plastic around the lever is broken) and the door puller is falling, Where I can find these parts online? I live in Brazil and here.. Well, it's not easy (to not say impossible) to get these parts. Thanks!

I haven't had my eclipse for a few years now so wife wants me to get rid of remaining parts. I have the following items. PM me if you have any questions, need additional pictures or are interested. All parts are from a 2006 GT 3.8L. 1) Driver's side headlight, Painted black inside, lens needs...

I attempted to change the serpentine belt on my car and the tensioner bolt snapped leaving the treads in side the base of the tensioner pulley can anyone please help what must I do pertaining to repairing this?