Search Results for ‘bullet’

I'm ready to bite the bullet on my first major modification, the DC Sports CAI4006. Unfortunately for me, I've got an 09 with foglights and apparently it means I'm bound for clearance issues. Browsing here and on Amazon comments, it seems a simple solution is to add an elbow between the intake...

Hey folks, Did a money shift today and over revved the engine :ugh: 3rd to 2nd right around 80mph/redline and the tach went straight up to 8k rpm in no time. Stayed there for about half a second before I kicked in the clutch and put the car in neutral. Luckily I dodged a bullet since there...

I have an 08' GS 5-speed that I'm taking to Mitsu for the ABS recall (I've lost brake pressure twice in the winter). The dealer is 80+ miles away and I'm wondering if I should bite the bullet and do the 60K service while I'm there. The car is only at 47K, but 8+ years old. I'm far from a...

So finally bit the bullet and bought the kit!! Not to familiar with nitrous yet though can anyone tell me what else I will need to install this and work properly Sent from AutoGuide.com Free App

Hey All, I have a Black 2011 Eclipse, which I bought last June. When I bough it, it had a pretty bad dent by the driver side door, only a tiny crack in the paint, but I took it in to get looked at and it has to be filled and painted, will not pop out. He quoted me at $650 bucks. So I decided to...

Hey guys do you think svt cobra rims 17x9 + 26 offset would look good our cars? There's a sweet deal for them locally and I'm debating if I should bite the bullet and get em :D I mean I think they'd look pretty badass but idk I've never seen it done! :runaway:

I live in North East Washington DC ,This happened last Tuesday night me and my family were celebrating my grandmothers 80th birthday,around 9 pm i took my aunt home because i didn't want her getting the bus that last at night it was so people sitting in the neighborhood but i see it all the...

Maybe I've just gone full retard and someone can help me. I have the FIC all hooked up it runs perfectly fine with the Bypass and the Bullet terminal unplugged. but when I hook the FIC up and plug in the bullet it wont start. What am I doing wrong? and just to be sure how do I load a damn map...

Okay guys, many of you know that I write music. I play guitar, sing/scream, play piano, play drums, and write electronic music. My favorite of them all would be either vocals, or being a guitarist. But, that is aside the point. I have been working on new music over the course of the past few...

So I just got back from Autozone, and I'm throwing ye olde bad cat code. Yes, I know it could be a bad rear O2 sensor, but would I really be THAT lucky??? Plus, it isn't throwing out any other codes. So here's my question...what's the best method to eliminate this? I'm not getting a factory...

These are our friend Matt's (aka bullet06) who recently passed. I am selling these to get his parents some money. CP pistons are 11.5:1 with a 1mm over bore from what he told me and BC forged rods. These are BNIB, everything still in wrappers. Looking to get $900 plus shipping, figured I would...

These parts are off Matt's (bullet06) car. If anyone needs any of it let me know and make offers. PM me or text (239) 273-9830 Tail lights are $30 each $50 for a pair +shipping Two are tinted with spray on tint and can be removed with rainx, one of the other two has a border painted on it. No...

These are our friend Matt's (aka bullet06) who recently passed. I am selling these to get his parents some money. CP pistons are 11.5:1 with a 1mm over bore from what he told me and BC forged rods. These are BNIB, everything still in wrappers. Looking to get $900 plus shipping, figured I would...

As some of you may know I got a stray bullet through my hood at work one night last week and I need a new hood..now there are some hinge I'm looking for..1st want the hood to be black if possible but if not may still work because I may be repainting the whole car. 2nd if it is a carbon fiber...

If you've been on the site for more than a month or look at the front page then you already know that fellow Club4G member "Bullet06" known as Matt, passed in a motorcycle accident. I've talked to his family and they've confirmed that they will be attending the Club4G meet on Saturday. While I...

well guys, I just shot the bullet on a set of D2's. from what ive read they are the lowest coilover on the market. just asking for some insight from current users, how do you like them, and most importantly, how does one go by lowering these contraptions? im aiming for nasty stance. be on the...

Gigastar is back, I apologize I have not been on in a while. On Saturday July 28th 2012 in Orlando, Florida we will be holding a Festival. Iron Fist Pro Wrestling, NWA: Championship Wrestling From Florida, And Florida Underground Wrestling will be having a huge free wrestling show at the...

Well seems like everybody is getting rid of their projectors and just my luck I have missed the sale two days in a row for them so figured I would make a thread for them so I can call dibs ha. Let me know what you have before I bite the bullet and get brand new. If nobody is sellin no big deal...