Mitsubishi Eclipse 4G Forums banner

bushing

  1. Wheels, Tires, Brakes and Suspension
    I want to upgrade to ES poly bushings, but ride quality and (mostly) cost are a concern. Is it possible to just replace the front control arm bushings and leave the backs OE rubber? Would that screw with handling/alignment? Has anyone done just front (or rear) only?
  2. 4G Eclipse GS/SE Specific
    Having a hard time getting any info or specifics for this little bushing that goes inside this link, anyone have a link where to get one?
  3. 2006-2012 Eclipse (General 4G)
    Well got my electrical issur fixed. Turned out to be my battery. Now ihave this clunking noise comming from the suspension. Its comming from the drivers rear mainly when i hit any bumps. The probelm is if I shake the car ive got a sound comming from the drivers front not rear. But when driving...
  4. Problem Reports
    I had one of my brake pads seize up today, luckily caught it before it did any damage to the rotors. I think the cause is from the Rubber Bushing being torn, the bottom slider was basically dry. I lubed it up good and replaced the pads, but I don't know how long it will last without a good seal...
  5. Wheels, Tires, Brakes and Suspension
    I had one of my brake pads seize up today, luckily caught it before it did any damage to the rotors. I think the cause is from the Rubber Bushing being torn, the bottom slider was basically dry. I lubed it up good and replaced the pads, but I don't know how long it will last without a good seal...
  6. 2006-2012 Eclipse (General 4G)
    Okay so i need to replace mine, but have a couple of questions where to get one. Checked multiple places and they don't have one like all the chain stores, rock auto and summit. Would the energy suspension motor mount bushing fit on the transmission mount or is that a different fit? If not...
  7. 4G Eclipse GS/SE Specific
    I took an old bushing mod that the older evo and dsmers made popular. Our GS has the evo 8/9/dsm bushings while the GT has the evo X bushings. Favorite mod to tie in my short shifter and BLOX style knob.
  8. 2006-2012 Eclipse (General 4G)
    I broke mine since they're plastic pieces of crap. Does anyone use anything other than the stupid stock one? Or know where to get a replacement? I know there are solid ones for other cars like the s2000 but I really want to know if the ball sizes are close enough. Anyone? :) I recently...
  9. Wheels, Tires, Brakes and Suspension
    I ordered a Works rear sway bar. I was doing some searching to find out which energy suspension bushing kit to use. Someone on here said to use the 9.5109 kit which is supposed to be 24mm but I've heard conflicting information saying they don't fit. Any ideas which kit, anyone done the rear sway...
  10. Member's Rides
    This is my first mitsubishi out of 40 or so cars I've owned. A stock 2006 GT auto with 76K miles. It will be a slow build as of now since money is tight. Trying to get all the issues and maintenance done first. Started out with a creaking in the back, has turned into a constant full blown...
  11. Problem Reports
    When we first got our car about two or three months ago it had a creaking sound in the back. Now it's progressed to a constant full on clunking. I was thinking bad bushing somewhere or sway bar links. It took me a few tries because the car stops doing it whenever I try to look for some reason...
  12. Automotive For Sale/Wanted
    Energy Suspension kit for 4G GT $159.99 w/ free shipping in USA. Local pickup available in SW Ohio. All are the higher grade black bushings (self-lubricating graphite impregnated) except the rear trailing arm, which are the lower grade red. Motor Mount Bushings - 5.1113 Front Control Arm...
  13. Problem Reports
    Here is my issue..to save time im just gonna copy and paste a message i sent to another member so keep that in mind when reading this. My clutch wont disengage...what flywheel did you get...and did it come with or did you press in a pilot bearing? I bought the findaza fly wheel with spec stage...
  14. Automotive For Sale/Wanted
    Selling ES poly bushings, never used. Front control arm bushings and rear trailing arm bushings. ONLY suspension bushings. No motor mount bushings. Price: SOLD Pictures
  15. Eclipse Performance
    Hey Guys, I'm about to get a new rod for my Mitsubishi 6G72, the maXpeedingrods site have the best choice. Recommended for everyone today! Link: amazon.com/dp/B00RYGO43C/ Fit for: Mitsubishi 3000GT Base SL Spyder SL Spyder VR-4 3.0 3.0L; Quantity: one set (6 Pieces), Center length: 141.00...
  16. Other cars
    Anyone ever used these rods? I feel that pretty good, Recommended for you today! Link: amazon.com/dp/B00RYGE6SA Here's the specs (for those too lazy to click the link). Fit for: Honda Civic CX DX EX LX HX RT Si Value 1.6L/CRX Si 1.6L; Quantity: one set (4 Pieces), Center length: 137.00mm, Big...
  17. Automotive For Sale/Wanted
    Title says it all. Inhale my car taken apart and I have them in order from ACI and they keep getting pushed back. Can't wait any longer.
  18. Wheels, Tires, Brakes and Suspension
    So I was in the process of installing d2 coilovers, got the fronts on fine and got one of the rear off but couldn't get the other one off. I got the bolt at the bottom of the strut off but I cant get the actual strut to slide off that sleeve. I wedged a breaker bar between it and I was pushing...
  19. Eclipse Performance
    HI Everyone, I just installed my energy suspension bushing to the front and rear..however, my car shakes/vibrates horrible when idle.... can someone advise on this? Thank you in advance
  20. Problem Reports
    So i got the part I need to fix the clunking in my rear end (giggity). The bushing in the lower control arm on the pass side is no good. I had ordered the control arm about a month ago, not knowing that I needed the bushing on the right side of the arm. 2006 MITSUBISHI ECLIPSE Parts -...
Top