Search Results for ‘camber’

Really just need the adjustable camber plates - F+R. (JIC, Megan, Tein with SS-P, etc.) Don't really care for the shocks/springs, just the pillar mounts. Seeing if anyone has some old ones they're wanting to get rid of. Ship to Austin, TX. Thanks!

Hey Everyone, I was searching but couldn't find an exact answer to my question. I am looking at ordering the Megan EZ Street Coilovers to lower my car. I have heard that you cannot go lower than 2 inches on this car or you will have axle bind. Some say this is true, others are slammed with no...

i was wondering what i need and how camber my car please thanks!

So recently I have been doing some forum snooping and article perusing on suspension geometry and setup. That on top of the "Track Setup" thread over in ECLIPSE PERFORMANCE : http://club4g.org/board/eclipse-performance/88498-track-setup.html got me wanting a place to discuss this topic in a...

I plan on getting new struts and springs this summer (Eibach Pro Kit & KYB Excel-G Struts), but I'm unsure about the camber of the wheels. Will I need camber bolts for both the front and back, or just the front? Will I need them at all? I'm having trouble finding this information and I would...

hey guys i realy need your help! yesterday as i was leaving a gas station i took a left turn going about 30-40 mph and didnt notice a pothole on the ground, my right front wheel grabbed it and yanked my steering waaay left and after the hit all my car wanted to do was turn right, steering is...

They were on from April 2011 to November 2012. Extremely low miles, probably around 5,000. They have never seen snow or salted roads at all. Will be cleaned up prior to shipping. Still in great condition priced to go. $750 + shipping and paypal fees. SOLD Fujita CAI. Perfect...

So about a week and a half ago, I dropped my car on Tein H tech springs and all the wheels did a negative camber as expected EXCEPT the driver side front. The driver side has a slight positive camber and I can't figure out why. I took it to get alignment and the guy at the alignment shop said...

To keep this post on topic (backstory below) Question: Hey everyone, I was just wondering if anyone (in PA specifically) had any idea of the legality of suspension modification? I currently drive an 08 eclipse, and was recently pulled over where the cop told me "any aftermarket is illegal."...

So I just recieved my s techs in the mail and i plan to do them next week. I have done some research and some people are saying that when you lower your car camber bolts help align your tires for even wear. True? if so how much positive or negative camber will I need with my 2.5 drop. Not a fan...

Hey guys im a new member and need some help! Im about to purchase S-techs for my '08 and needed to know which of these two options i should go with. One is off of amazon that is sold by GM Wholesale going for $148.89 labled as Tein SKR70-AUB00 S.Tech Lowering Spring for Mitsubishi Eclipse...

As some know I'm designing a bolt in cage for our 4Gs. Unfortunately I've run into a problem. I have to purchase a new tubing bender. They are NOT cheep. So, I have a couple of choices. One, I can just set on my hands until I save the funds for a new unit. This will delay production for a few...

These camber plates are installed onto a true coilover and is able to adjust the camber and caster. As many of you know the rear coilover on our platform has no adjustment on the camber, there are no camber bolt kit available also. So being said I'm rolling on a set of 275/35/19 tires and...

Does the geometry of the suspension get changed much from using lowering springs on the 4G's? Concerning camber mainly, and the toe. I don't want uneven tire wear due to those things. I had a 94' 325i for 3 1/2 years and installed a coilover suspension, but the alignment was off due to having...

Ok Im looking at getting some coilovers. Ive noticed the Megan Racing EZ Street does not come with camber adjustment. Im just looking for 1.5-2 inches of drop. No camber or wheel stretching, just low. Will I be fucked without adjustable camber plates or will the stock ones be fine?

Any one know about these coils before I buy them? And can I apply any rear camber with them I havent updated my pictures yet but im now on 20' cv5 20x9.5 front 20x10.5 rear

So I'm looking at these , and thinking they are probably the best option to widen my stance a bit. Jason suggested +15 front, +20 rear , and for the time being I will be on the 225/50/17 stocker rims. Then will go to a s tech lowering spring. So will I need anything else for fitment , or...

OK guys. Im new to the forum and this is my first post. Just got my 06 GT the other day and noticed right away that something didnt look right. Long story short its the gap between the tires and the body. After doing tons of serching and reading on here im trying to decide between buying the...

Hi Guys, Will this spec give me a problem on the inner fender clearance? 19x9.5 et35 and 19x10.5 et 35, running 245 35 19 I'm mostly concerned on the 10.5 wider offset 35 on the rear. Will i require to add spacers, camber adj and roll fenders? Im dropped on D2, btw