Search Results for ‘carb’

Recently bought an '06 GT - didn't try the air until it got hot - no air. Pump was not engaging - all lights were coming on. Found a small brass valve on top of the AC pump that was stuck open. It looks almost like a needle/seat from a carb. Pressure safety shut off? Not sure but I took...

For sale - slightly used K&N Typhoon intake kit from ACI. Finish is in pristine condition. Direct bolt on All hardware is included. Original installation manual, owner guide and un opened/unused CARB sticker all included :fever:- in original packaging. Doesn't get closer to new than this. I can...

First off, I don't know where this thread would be appropriate, so I'll just post it here. Well... Lets just say an unfortunate series of events lead to the downfall of my exhaust system. I'm currently in California with the CARB laws, so I need a stock exhaust system rather sooner than later...

I drive an 07 gs and want to start building my secondary motor (from an 05 outlander with 80k) My problem is in California you have to smog every 2 years and anything visually not stock that does not have a CARB compliant badge will force a no pass :wallbash: with maybe the exception of a...

Guys, our massive July promotion on performance air intakes by K&N has almost come to an end. Yet you still have a couple days to get these products for your Mitsubishi Eclipse at lowered price. Till the end of July '17, don't miss your chance to purchase any K&N Air Intake System and get $25...

Here is the story, As you may have seen in a previous post I took my 06 gt apart a bit in order to change timing belt, waterpump, and a few pulleys. Upon entering my engine I came to learn that all my belts, pump, and pulleys have been replaced by the previous owner and were in perfect shape...

Its a well-known fact that catalytic converter is a part of your vehicle's exhaust system and a key component of the emissions system. When choosing the catalytic converter it is important to go with the best, and Eastern Catalytic knows what to offer you. A market leader in catalytic...

Got an annoying lifter tick? Fix it before the hammering starts damaging the end of your valve stems. They're not that expensive to buy new from the dealer, but if you don't have time, and are stuck on a weekend when nothing is open and want your car back together, then try this... You will...

Just seeing if anyone has any ideas because I'm at a loss. I have a 350 with a recent carb conversion. Carb was rebuild but there was some things that I was unsure of if it would work properly. So carb is still in question. Fuel pressure has been regulated and I've tried to set the timing...

will post a few pics of the motor in a few , first it has the voodoo3/4 cam 350 turbo trans and a 12 bolt rear axle ,was built by a local speed shop ,12,500 in drive train alone....this thing sounds like a drag truck, the 383 stroker has hop up heads and all kind of extra incl performer high...

alright so im tryin to get my snowblower going since were getting hammered with snow up here. Had it for a few years, never had an issue with it, always started 1st or 2nd pull. This year, pull it out try to start it doesnt start. Gas starting pouring/dripping out of carb. Let it sit, tried it...

hey 4g, 1. Name: angelthrust 2. Car you drive: 1976 Corvette Stingray, Hurst 4 speed, edlebrock intake manifold, hooker headers, HEI super coil, other stuff. 1990 Jeep Wranger 6cyl, lifted, 33's, etc. 3. Have a picture: not yet 4. Do you know anyone...

hi. im fairly new and need help. Im from san francisco, ca. I tried to smog my 2006 mit. eclipse GS however they are not passing the visual aspect of the testing. Does anyone know I can pass without changing back to reg stock parts? I have a aftermarket air intake and headers that do not...

Hello, I am new here, in fact I am new to modifying any car, i pretty much just have basic knowledge due to hanging out with a bunch of friends who time attack and participate in d1gp events, but they are all into rwd and would never touch an eclipse. Rather then bug them about this id rather...

Hey everyone, I have a slightly used air/fuel gauge for sale. $45 shipped! I only used this to tune my old firebird when I switched from electronic carb to reg. carb. Its just been sitting on the shelf ever since. Just to clarify, this is the narrow band that you attach to your oxygen...

Ok finally got this working....Here is a few races I dug up so enjoy... First couple of vids are against a 19 something olds. Has a 350 4 barrel carb and he smiled when he heard that an eclipse wanted to race. Here are the results...

Hi, i don't know if this has answered before but i didn't find it anywher. Is DC sports Cold Air Intake is legal in CA and is CARB......if it is can someone find me its EO #? THanksss

I should probably start out stating, I'm no 20 year old type. I'm currently 44 with a wife and a kid. Probably the first real fun car I had was 1980 Camaro w/ a 4 barrel carb. That car was old as hell when I bought it but it could move. And I loved it!! Then I went to a 1996 Sunfire GT 5 speed...

So I live in one of the five lovely states that abide by the CARB emission laws. Has anyone compiled a list of CARB approved mods so I don't have to deal with the popo forcing me to pull out the mods? Are there any CAI's or Turbos that are CARB approved?