Search Results for ‘cutout’

Hi y'all I noticed some oil leaking under my car. It not too bad but i think its transmission oil because its right next to the CV Drive Shaft axle. I noticed that there is a little clean cutout hole in the same spot underneath so its a factory cut, right? I also put in Redline trans gear fluid...

Hi guys, I thought someone may be interested in this build I am currently completing. It is a Lancer (Australia) with the 4g69 engine. After considerable research I could not find anyone who built a top-mount turbo setup, I may be wrong...but having built hundreds of turbo setups in my...

Whats the stock gt exhaust size. Im looking to put in a cutout to bypass everything back from the headers on the fly. Just not sure what size the stock pipe is Sent from my VS995 using Tapatalk

Hello, Im looking to replace my body kit and go back to stock mitsu bumpers. While trying to figure out exactly what i wanted to do I came up with an idea... I dont really like the rear on the 2009+ bumper cover, But i like the front on 2009+. I Still have my 2011 front bumper with slight...

Brand new optimist green fangs and hardware 210$ shipped. Also have the e4e carbon center lip with a few dings here and there. Its a solid part you could fix it easily or just paint it. 140+shipping Brand new optimist green aero side skirts with hardware. 200$+shipping I also have a...

I am selling 2 items which i have no need for. First is a new set of Ralliart Eylids which are not painted and come in original package. $75 shipped. Second I have a 2.25" exhaust cutout which i have no use for because i have installed a catback exhaust. $60 Shipped. Text me at: 423-544-7987 if...

Got a few things up for sale, some are from a previous FS thread but I have a few more items as well. First up, I have a sunset pearlescent (M03) painted pillar. Has a few minor scratches and a teeny spot of paint missing, but it would be great for a replacement in worse condition or could be...

hello from puerto rico, i want to show you my ride/project car... it's a 1997 Mitsubishi Mirage LS with a '08 6G75 Engine and a '04 6G72 Tranny... it also has power steering and i also have everything for the a/c sistem... the car is currently waiting for dyno... i am using a 98-99 montero ecu...

Alright guys. This is a rpm activated window switch. This lets you use modules to determine when to start injecting and stop injecting nitrous. I'm selling because I kind of enjoy flipping the toggle switch myself now. In order to use this you HAVE to have a tach adaptor. Joeyb sold me one...

A couple years back a member got seat covers made from a store on ebay and they looked sick. Well i could no longer find that store and they didnt respond to my emails so i went with one I did find. They communicate great with you and you will most likely hear from them before they hear from...

Selling my Cutout. Easy to wire and its controlled with a wireless remote so no switches or anything complicated. Asking 150 OBO +shipping. Will trade for aero muffler or anything else worth asking. Worst I can say is no :bigthumb:

Okay guys, I blow when it comes to photoshop, but I want to see what my car would look like wish a couple different things added. I just ordered black projectors, and sold my chrome ones. First: Can someone take the one of the pictures below and do the following. A) Black out middle section...

where should i place my new cutout to get the best sound/performance? some of my buddys say i should place it behind the cat rather then running straight headers, but doesn't that defeat the purpose of no back pressure?

Electric Exhaust DUMPS Cutout COMPLETE SYSTEM 2.5 IN | eBay Was cruising Ebay and came across this, the idea behinds it sounds fun but practicality? any of you guys come across set-ups like this?

so I just put my injen intake on, I went short ram for now and I love it...super loud. i have the r spec hood and when i closed it i noticed the filter is right under the path of where the cutout in the hood runs water off. so anybody with this setup or knows what i'm talking about, i wanna know...

In need of the trunk mat that says eclipse on it. i need the one without the cutout for the sub.

As the title says ;) i have 4 Motegi SX-7 rims, 17" x 7" for sale. they have 2 bolt patterns, and obviously fit the Eclipse ! they come with hubcentric rings to avoid any bad vibrations. As i'm now running stock wheels for winter & summer, i'll also throw in the lug nuts and wrench adapter...

Hi, i know i'll get flamed for: - that's a ricer thing - you dont have an old muscle car, live with it - crappy video - dumb idea... but, here it is! i just got this baby installed today. took the 3rd cat right out and replaced it with a remote-control electric cutout from Raceland ($ 118 +...

Which Spoiler Cover (delete) covers the brake light also? I looked on AutoCityImports and they only have the one with the cutout for the brake light. I just got a painted 2009 spoiler and it has a brake light in it already. Thanks in advance.

I read every thread i think about this, but I havent read anything with an electronic cutout exhaust. I have the exhaust done, I'll have the headers after the first of the year, my question is, when I have the exhaust closed vs open, will that change back pressure enough to throw the o2 sensor...