Search Results for ‘engine bay’

Hi all, I had a steel brake line corrode through on my 07 GS. I've paid a premium to a shop to have them all replaced but they've done kind of a sloppy job with the routing in the engine bay and I'm planning on taking it back to be rectified. Stupid me didn't take "before" pictures of the...

What's up guys? As you can tell from my pics, I have an aftermarket Blackout-3 front bumper from AIT Racing (close up pic of bumper is attached). Unfortunately, I can't figure out a way to get my stock foglights mounted in it (trust me... I've tried everything lol). My foglight wiring/internals...

Hopefully someone has an answer for my really obscure problem I've been troubleshooting. So I just did an engine swap, and now when I turn the key to "On", power is alright. The ECU is getting 12v, ECU grounds are good, body grounds are good, trans ground is good. However, when I turn it to...

Hi All, Proud new owner of a Ultra Red Pearl 2007 GT V6 Manual... while changing out my windshield wiper fuse I accidentally pushed one side of the terminals down into the fuse box. I must have inserted a bent fuse. Any fix for this, I have tried a pick, tweezers, etc and just can't grip it to...

Hi All, Proud new owner of a Ultra Red Pearl 2007 GT V6 Manual... while changing out my windshield wiper fuse I accidentally pushed one side of the terminals down into the fuse box. I must have inserted a bent fuse. Any fix for this, I have tried a pick, tweezers, etc and just can't grip it...

Hey Guy I need some help ASAP last night I got in my eclipse to drive back home and started it up and turned on the lights and nothing no headlights no dome lights no parking lights no tail lights. A friend came by to help me and we spent an hour in a half checking all fuses and even changed...

Has anyone managed to find silicone hose and tubing kits for our engine bays? I know there are universal kits to improvise with but by any chance would there be an actual kit from a company like almost every other car has lol Sent from my iPhone using Tapatalk

Anyone had any luck cleaning their engine bay? I was looking around on the forum and haven't seen any pictures of peoples engine bays looking super clean. I'm not too proud of what mine looks like... Engine block is rusting and peeling.. Piping and body on the inside is very dirty, you know...

Hey guys, so yesterday I was trying to install a double din stereo on my own, and it went terrible. I disconnected my battery and proceeded to begin install. I connected everything together, connected battery, next thing I know, none of the car accessories work! None! This includes headlights...

Story time: I called AAA for a jump start because I dont have jumper cables, the guy that came crossed the cables + to - and - to +. The car freaked out, wiper fluid was spraying and the wipers themselves were running although they were off in the car. The fuse on the battery blew, I have a...

Hi guys, So I have a problem with my top. It is making a grinding sound at the end of the top-up and top-down cycle when I go to put it up or down. Actually, it sounds like its slipping, but it's definitely under stress. I put the top up halfway and looked around, and found what looks like a...

Got this car almost 2 years ago. I’ve always wanted a 4th Gen eclipse, and after I totaled my 2013 3.5 Altima (I’m really salty still) I finally got one. Just recently started actually getting into the auto world, and my wife tore this thing up while I was deployed, so I got a lot of work to...

Now with video: https://www.youtube.com/watch?v=EO0iGrYQV1U sound is most apparent when i poke under the hood about 15 secs in. Hey all! Long time no see. I'm having a terrible racket under my hood and was hoping someone could shed a little light on it! When I first bought her (22k mi) it was...

Have y'all cleaned your engine bay? what do you guys do to get the job done? Im a bit skeptical using a hose on it....

Here is the story, As you may have seen in a previous post I took my 06 gt apart a bit in order to change timing belt, waterpump, and a few pulleys. Upon entering my engine I came to learn that all my belts, pump, and pulleys have been replaced by the previous owner and were in perfect shape...

This is a shot in the dark, but does anyone run red wire looms/covers over their hoses in their engine bay, and what brand did you get? I got a set from my local autozone, but they look... pink. Is this how all red wire looms are? I found a set on amazon that I want to try, but I thought I'd...

I checked earlier today on the forums and wanted to post here (first time) since I bought a new to me 2007 GT SE trim. I'm thankful for allot of information here that helped me purchase this car. So, on to the issue: SRS light is on now. Was not before. I narrowed it down to one of two things: I...

Ok guys so my 2008 with a new battery takes a second longer to crank than normal, idk whats up with that but once it cranks and i shift into drive and begin driving there is this loud Boing sound, literally it sounds like something comes lose but nothing happens to the car or anything. also when...

So I finally take the car for a nice drive today (first time after the guy delivered it to my house). The check engine light came on when I was driving it. Either it's coincidence or the guy reset it before delivering it which is why it wasn't there. I also noticed a small puddle of oil in my...

So after i washed my car i washed my engine bay with water hose( not pressurized, just a garden hose) then after a while i got back started the car fine but the headlights didnt turn on then turned on my foglights it did turn on but after 3 seconds the passenger fogs turned off. Now im only left...