exhaust manifold

So my cars been sounding weird I believe there is a hole in the front y-pipe. would it be best for me to replace just the y pipe or the whole front exhaust manifold and y pipe? Any suggestions or links would be helpful thank you

In order to rebuild an old, rusty motor, you need to go through every single component. As a matter of fact, you'd be better off replacing factory parts with aftermarket goodies. On a Hummer H3, replacing the stock cast iron exhaust manifold is a necessity, due to it being prone to cracking...

What's up everyone! Just made a youtube channel and it would mean a lot if you guys checked it out!. I plan on making vlogs, eclipse stuff/ car stuff, and reviews. I just uploaded a video of my eclipse gt with and without its pre cats, so see the video and it would be great to have some...

Tried to replace starter this weekend on my 2010 GS 85k miles. When attempting to remove the O2 sensors from the exhaust manifold to get the heat shield off, only one sensor would come out. On the stuck one, i ended up using almost an entire can of PB blaster, a torch, some big leverage bars...

So I just received the my new RRE header for my 2.4 Eclipse and I was hoping to replace the rusted bolts studs coming out of the cylinder head that you slide the top 6 holes in the exhaust manifold onto...... now I’m not sure how difficult that would be while having it in the car because I...

I haven't had my eclipse for a few years now so wife wants me to get rid of remaining parts. I have the following items. PM me if you have any questions, need additional pictures or are interested. All parts are from a 2006 GT 3.8L. 1)Mitsubishi (1570A962) - Cross Over Pipe - $50 + $15...

There is Mitsubishi Outlander XL , but I made Outlander XXL I installed turbocharger to the engine V6 6B31 mivec. For this reason I made unique exhaust manifold for twinscroll turbochager. I place turbine above automatic gear box. FMIC Front mount intercooler is installed and also made new...

My eclipse just started making a new noise that seems to be coming from the engine block behind the exhaust manifold. It's kind of a rhythmic marble rattling kind of sound. checked heat shields and pretty sure those are not the problem. could it be the timing belt or the balancer timing belt...

My 4 cyl engine started making a new noise today, kinda like a bag of marbles jiggling around. seems to be coming from the front of the engine right behind the exhaust manifold, checked the heat shields and it's not them. do you think its my timing belt adjuster. I have a short video...

So I just found this place because I bought some headers & an exhaust the header was from ebay the name is: FOR 06-12 4G MIT ECLIPSE 4CYL 4G69 4-1 STAINLESS RACING HEADER EXHAUST MANIFOLD it is sold by speed_daddy The exhaust from carid: Torxe™ - Stainless Steel Cat-Back Exhaust System with...

Does anybody have any experience (I.E.) problems or fitment issues with the Walker Exhaust manifolds from CARID.

Hi All, New problem popped up code P0174 no other codes Things we did prior to this code due to other codes: Replaced exhaust manifold and 4 O2 sensors a few months back as we had a different code indicating precat and O2 problems and live data was showing precat and O2 sensor readings that...

Hi all, Newbie to Eclipses (but not Jeeps LOL) and confused trying to help my daughter's boyfriend replace exhaust manifold and O2 Sensors. Iv'e searched through the posts here and you all have great info. but wanted to see if the following O2 part numbers and locations are correct. Any help...

First off, I don't know where this thread would be appropriate, so I'll just post it here. Well... Lets just say an unfortunate series of events lead to the downfall of my exhaust system. I'm currently in California with the CARB laws, so I need a stock exhaust system rather sooner than later...

Hey everyone, When I was down changing my oil the other day, I noticed that one of my pipes was darn near rusted through. My friend said it was the pipe that ran from the exhaust manifold into the header tube before the cat. It's a J-shaped thing that looks like it has a metal sleeve (that's def...

Hi friends! In this topic I want to talk about the headers. I don't know English. I understand what it was, what kind of things are discussed. But I do not understand why the exhaust manifold is called the "header". My translator translates this word as a "title". Well. All people (tuners...

The short version: the car won't start after replacing the starter and putting everything back together again. Now for the long version. - Back in the begin of January, I stopped for gas on my way home. No indications of any problems. - After I was done, when I went to start the car, all I got...