Hello my name is Heyshar. I've been a member since last year. I didnt know how this worked so I have never write anything over here. Now I have a problem and I dont know if this is the right forum. But my car is a 08 Mitsubishi Eclipse gt 3.8 M/T. Im having problems trying to find the flywheel...

All I have left are these taillights, everything else has been given new homes. They are used, but are not scrached or chipped. They may need resealed, as they had started sweating inside the lens on muggy days, but I am not sure. $50 takes them.

Flywheel Issues 2006 GT v6 MT Hi, I have a 2006 Eclipse GT 3.8L Manual Trans and have recently pulled the flywheel and was going to replace it when i noticed there were no shims. It had been burning up starters and this may be the reason from what i've read. One guy listed part #MD365781 and...

Hey, I'm getting a clutch (FX100) and steel flywheel put in on a stock Eclipse GT (ish). Figured it might be a good time to get a differential installed since I'm having a shop work on it...

In the exploratory phase of auto to manual swap and have a few questions. The shop that's been doing my suspension has done this swap before (4G MT swapped to Galant) and is onboard to help with the install. I've following salvage titles on erepairables.com and someday will find a donor car...

There isn't a single build in the world like this one. This car is based on a 2nd gen Mitsubishi Eclipse platform, and was built by Full-Power-Motors racing team for the sole purpose of breaking records in the FWD category of Russia's national drag racing championship. What makes this car unique...

RockAuto now offers an even larger of selection parts for your automatic or manual transmission, all at RockAuto's reliably low prices! Found exclusively at RockAuto.com, RhinoPac Clutch System Kits by AMS Automotive contain the typical clutch kit components along with a new flywheel, new...

Hey guys, "new" here....I have lurked from behind a screen since Aug of 2014 and watched you all...lol jk but I did take a lot of advice on our cars along the way and the builds on this site are why I went ahead and kept my car instead of trading it off after the wrecks...yes there were a...

Hello...I am new to this forum. Just bought a used 2009 Eclipse GS for my son as his first car...got a great deal, and he loves it! My apologies in advance if this question has been asked/answered/beaten to death, but I have done searches on both the forum and Google in general and have seen...

Selling my brand new unused Luk dual mass flywheel for six speed GTs. As the opening sentence suggests, this is right out of the box (box is not original) ready to install and in flawless condition. 26 pounds. Reason for selling: went ahead and used the Aasco lightweight flywheel for my build...

Hey, I picked up a 2009 GT6 last summer and I love it.. I was driving today and noticed that clutch was slipping a bit but figured I could continue the drive and check it later.. Moments later my clutch pedal felt like it stuck down when I pressed it so I stuck my foot under it and it came up...

So it's been suggested to me by more than one person to forgo installing the LW flywheel and go instead for an OEM. Problem with that is they're very expensive (~$800). After a little digging, I came upon the Luk brand and see that they make drivetrain parts for our cars, including dual mass...

As some of you know, I'm building my GT for drag. I don't intend on breaking any records, but I do plan on going fairly often (at least one session per week). I know that could be rough on the components, especially so on a modified car, so my question is not so much what can break, but what...

So I've been busy this winter collecting parts for a drivetrain overhaul come spring. I've picked up a clutch, flywheel, LSD and some MT-90 fluid. What else do I need to know/do before handing it over to the shop? Would rather have all my bases covered and leave nothing up to chance before the...

Im new to the forum so forgive me if I'm making a mistake here. Im working on a 2008 Eclipse 2.4L with a standard trans. The car was not shifting and slipping under load. Also, it was making a horrible grinding sound. I read about the transmission issues so i decided to pull the transmission and...

Car is getting a new clutch and flywheel come spring. Figured since the brake fluid will need to be bled to do the work, it might be a good time to replace it entirely. There are 129k kilometers on the fluid and it's starting to look quite dark. Car will be used predominantly for weekends and...

ive always browsed this forum for information so I figured it was time I hopped in and said hello. Im Gideon from San Diego so if any of yall are nearby let me know. I own a 2006 Mitsubishi Eclipse GT 6spd. ive done some dumb shit and drove the piss out of it. I bought it when I was 19 and had...

Putting the flywheel on a 2.4 5-speed. There are 2 "driveplates" and the flywheel assembly. Is it crankshaft, driveplate, flywheel, driveplate? Some other sequence? The service manual is no help. Thanks in advance!

I can feel my throw out bearing going out and I'm sure that the clutch that's on there is the original clutch, and I've got about 124K miles. I think it's time for a new clutch. I don't plan on boosting or nitrous, so I imagine I don't need a clutch rated for 400HP, but at the same time, I want...

Now with video: https://www.youtube.com/watch?v=EO0iGrYQV1U sound is most apparent when i poke under the hood about 15 secs in. Hey all! Long time no see. I'm having a terrible racket under my hood and was hoping someone could shed a little light on it! When I first bought her (22k mi) it was...