Search Results for ‘front’

Has anyone swapped rear and front 4ga (06-08) bumpers to 4gb (09-12) bumpers? im planning to do them but apparently mitsubishi doesnt sell those parts anymore, and im asking if there is other sites where i can buy these parts and if anyone has done this swap before

Hey Everyone. Wanted everyone to know that Boosted Fab (Boostedfabrication.com) you can now order custom Poly Engine mounts to replace the Hydraulic mount for both GS and GT. As well as the Trans mounts for the GS and GT. I'm running them both along with the Energy suspension Bushings on...

My son recently purchased a 2009 Eclipse Spyder. Its a great looking car but needs a rear bumper cover replacement. He is looking at maybe a front and rear bumper cover kit to upgrade the look. We are seeing mixed reviews on the kits and wanted to research what would be the best. Has anyone...

Hi everyone. So im having a weird electrical issue that is affecting my idle a bit. I recently replaced with an ACDelco reman alternator and it was running so clean until after my first 60 mile road trip. Here's the symptoms. At idle, my fuel pump is obviously oscillating causing somewhat...

Hi, folks....as per the title. I have a 2008 GTP and am about to order new pads. Are they the same? Thank you!

Hey everyone, I've been working with a custom engine mount fab shop out of PA called Boosted Fabrication. If you follow my IG @rennasgarage, you will have seen the custom engine mounts he made for my GS. It definitely makes the driving experience much more precise. It feels like I have less...

Greetings. On my 2007 GT 6 Speed, I get the TCL, TCL OFF and ABS lights on together. Reading codes from the TCL module shows "Front Left Wheel Speed Sensor". Reading live data while driving shows identical speeds from all four wheels (when driving straight forward). I tried reseating the wheel...

I want to upgrade to ES poly bushings, but ride quality and (mostly) cost are a concern. Is it possible to just replace the front control arm bushings and leave the backs OE rubber? Would that screw with handling/alignment? Has anyone done just front (or rear) only?

Mine 2007 4G GT started to blow Engine control 20Amp fuse (#9). Happens on start up: just turning ighnition ON, without cranking an engine blows the fuse. Cannot even pull the code. Front ECU (one in fuse box) feels pretty hot, but then again it is 95F outside . Any suggestion guys?

So my cars been sounding weird I believe there is a hole in the front y-pipe. would it be best for me to replace just the y pipe or the whole front exhaust manifold and y pipe? Any suggestions or links would be helpful thank you

I have a 2006 GT 3.8L that had D2 Coilovers installed on front and rear when I bought it. After taking a look at the suspension I noticed the front sway bar is not connected on either side to the coilovers- it's just sitting on the frame of the car. I know I need to get end links in order to...

I have newer EBC rotors and OEM pads (<3k miles) and fairly new brake fluid (ATE 200) and considering swapping front pads for track day. I've heard that this can cause major rotor warping, and also that it's perfectly fine as long as both get proper bedding (street to track, track to street). My...

Parked on a hill and the front has around the right amount of gap that I would like, how are speed bumps with it this low? My corvette scrapes everything above 2.5” is this how a low eclipse is? Lol dumb question but kinda curious as she’s gonna need shocks one day anyway

Hey guys, so my car came with some XXR 530 size 17.8.25 with 205/40/17 up front and 17x9.75 with 215/45/17 in the rear. The tires are pretty stretched, I’m trying to find a good setup that has the best performance to look ratio, but can’t decide. Any suggestions?

So my Eclipse was in a crash recently but has been put back into working order with the help of a local garage. Unfortunately, they didn't do a wonderful job reconnecting the fog lights (as well as many other things). I had to rewire the passenger side and found the connection they had made...

First to comment with a link to their build thread gets a feature on the front page. Include a mod list, and 2 of your favourite pictures on it

Hey guys, I'm looking through for active members build threads all the time for picking a new Car of The Month, but the options are pretty slim. If you'd like the chance for a feature on the front of the web page, throw up a build thread (link below) and cross your fingers! If there's enough...

Hey all, I have been trying to open the hood for two days. I have cut out the upper grills so I have full access to the hood latch assembly. I have seen people saying use a screwdriver to get leverage, however I do not know where to put it and in which direction to put the force. I also...

Hey guys, I'm on page 194 of https://tearstone.com/eclipsefsm/2006_PS24S_MMNA_SM_PDF/GR00000400-90.pdf looking at connector A28, which is for the air temp sensor for the A/C, I'm trying to figure out which pin is pin 1 and which is pin 2. Is the little diagram in the bottom left for the...