Search Results for ‘hks’

Here is something different from Zmotorsports :) 4th Gen Eclipse Plaques. Made from 3/4 inch stock. These plaques can stand on a shelf, display at a car show or be hung on a wall. Each is about 10 1/2 inches long and 5 1/4 inches tall. They are in a natural state so each person can finish to...

Hey guys, I tried searching for this specific question, but I can't seem to find exactly what I'm looking for. Right now I have a muffler delete and it sounds nice, but I plan to get the OBX long tube headers soon. My question is, would the headers sound better with a straight pipe to, say, an...

Hey guys I'm in search of an HKS Axle Back Exhaust for my 06 GT, I was wondering if there is still a chance to get my hands on one of these setups? Also, is there a chance anyone knows the piping diameter? I'm assuming is 2.5. Just seeing if anyone knows though. Thanks!

Congrats to Fabguy on COTM! Modifications Power: Ross pistons BC rods ARP head studs ARP main studs Cometic head gaskets Custom valve springs Modified fuel rail 720cc injectors Duel fuel pumps Duel fuel lines DW65c in tank pump walbro 255 inline pump fuel pressure regulator SS fuel...

Congrats to David on COTM! UPDATED PICTURES COMING SOON!!! EDIT: Eventually but there's a good reason Modifications Power: AEM FIC6 Ripp supercharger v5 blower with stage 2 pulley Ported & polished intake manifold Ebay oil catch can rre pulley front upper strut bar Poly motor mounts...

It has 60mm piping with a 120mm tip. Please help and thank you! its the HKS-32003-BT001-Hi-Power-Exhaust. I cant post the link because i'm a new user but you can find it on Amazon.

spark Plug -HKS M40I oil - Castro 5W-20 i do the oil change and the spark plugs and i got a check engine light on . plus i got a really ruf Idle .. need helps please and advise would appreciated ,,,

Hi first timer here can someone help me out on which motor option to go with looking for a eclipse spyder and cant decide on 2.4 or 3.8, reliability and cost of repair is my main concern thks

Title sais it all. I am looking for a hks hi power mufler, the one like on gt axle back. They dont make those for gs so i will weld myself on. Thanks

Title is correct, I am selling my turbo kit that I have built but did not complete there are few parts to finish it off like the inter cooler piping and the boost controller and that's it. To start off the manifold was completely custom made out of cast iron by a seller on eBay a very long time...

I was wondering if any of you guys with the Hi-Power muffler could chime in. I have a 2.5" exhaust. Tired of the Magnaflow and wanted to change it. They make the Hi-Power in 60mm and 75mm but the Greddy comes in 60mm, 70mm and 80mm.

I'm just seeing if there is anyone out there that is looking to sell there HKS. I would like to spend between 100 and 150 which might be a stretch but let me know. I would also be willing to trade my axleback with cash on top.

Up for sale is an HKS hi-powered exhaust. Has a few dings on the bottom from being lowered but nothing to concern you. Selling for 180 shipped in the lower 48.

So ive decided to go the less expensive route and customize my own catback exhaust and get it done by a shop, instead of blowing $600 on a magnaflow cat back. Doing so I should save around 200 bucks. So after some research on the forums, Ive read that the HKS axleback delivers a deeper exhaust...

I am currently doing a turbo build on my 06 GS. I am in search of turbo manifold, forged pistons, fuel injectors, up and down pipe. Honestly everything i have a 18G turbo and HKS ssqv. I am also looking to swap my automagic tranny for the gs 5spd manual, so if anyone has that laying around feel...

Looking to see if anyone would wanna sell their hks axle back before i go ahead an buy a new one for 270. Let me know! Thanks

I've used Gates in the past, but does anyone know of a better option? I've searched Greddy, HKS, Dayco but haven't found anything for the 6G75 from those brands. Anyone know any crossover part #'s? Just prospecting what is out there.

FS: Morimoto H13 HID Kit 6k, 35 watts. Complete. I have traded my car in and have no need for any of the below. All items are ready to ship. Payment through PayPal. Fifth would be Morimoto HID kit. This carries a 5 year warranty, which I think still has 4 years left. While this is not...

I think its time for a new ride thread. I've never named a car before. But I think this car needed a name. Her name is Kaiju. (strange creature) 464whp 439tq And still going for more. engine Ross pistons BC rods ARP head studs ARP main studs Cometic head gaskets Custom valve springs...

So I have seen the same exhausts over and over again like Magnaflow, Injen, HKS, Greddy, ebay kinds, and a few different setups with (flowmaster,dynomax). I'm looking for a deeper growl sound without having to use a flowmaster, there is one setup with the 10 series I really like, but want to...