Trying to determine source of transmission noise; See below or this thread www.club4g.org/board/cars-sale-wanted/121099-2006-gs-5-speed-trans-noise.html#post1920375 Make a difference as to whether I keep and repair or let the car go ! Any input appreciated !!! Makes a bearing noise when...

I have owned it the last 10 years. Have kept up with oil changes & maintenance 104K on odo . Two new tires, dash always covered. Bone Stock. Starts, runs, shifts fine no issues . Makes a bearing noise when clutch pedal is out (engaged) goes away when I push down on the pedal. Been told might be...

Thank god this site is here! I'm a new owner of a 4g 2006 5-speed manual transmission Eclipse, but I am here with a couple of questions, one hard, one easy, or both hard? anyhow, Easy question: Does the 2006 5-speed tranny Eclipse have a Passenger CV Axle compatibility with any other car...

Hey all, So shortly after my first post my eclipse (GT V6, 6 Speed Manual, 204,000kms) was in an accident. Instead of buying the necessary new parts (over $4000 worth) I decided to purchase a second eclipse (GT V6, Auto, 85,000kms). As it turns out the engine on the second eclipse has very low...

Been on the site off and on for several years. Really appreciate the good advice. Especially on the Aux Input. Never could have done it without this site. Decided I should pull the trigger and join. Had a 3rd gen originally and upgraded to a 4th gen 2008 Spyder GT a few years ago. Great...

Has anyone had any experience with removing the input and output shaft speed sensor on an automatic transmission? Engine is a 3.8.

Has anyone else had this issue? I think it's a possible input shaft bearing. Also rattles a bit in idle but most noticeable in 1st gear.

Planning on buying winter tires on rims. Will the following wheels/tires fit a 2008 Eclipse GT without rubbing or complications? Any recommendations or input on choosing minus sized rim/tire combos? I'm from Canada (land of ice and snow). Option 1 205/65R15 x 6 ET48 Option 2 215/60R16 x 6...

I'm about to pull the manual transmission out of the car to replace the input shaft bearing. I wasn't sure if I could do it on jack stands or if I needed to invest in some sort of lift. So basically, how high does the car have to be to remove the transmission?

Well I finally got some new shoes, I'd like to see if you guys have any advice for a brake calliper paint colour? I am having trouble making a decision with the Sunset Pearl colour. And does anyone know the part # of the Injen Hydroshield for the Injen CAI for the GT...

So I've been busy this winter collecting parts for a drivetrain overhaul come spring. I've picked up a clutch, flywheel, LSD and some MT-90 fluid. What else do I need to know/do before handing it over to the shop? Would rather have all my bases covered and leave nothing up to chance before the...

Just wanted to introduce myself as a new member. My name is Bobby and I reside on the Eastern Shore of Maryland. My daughter drives a 2007 Eclipse GS that my wife and I bought for her 16th birthday. She has had the vehicle for 9 years now. The vehicle was used but in very good condition and...

I'm gonna start this by saying that there were no major injuries. Thankfully we both had our seatbelts on, and weren't speeding. Ok, show and tell time. Yesterday my girlfriend and I were in a car accident. For it to happen a lot of stupid things had to happen, but the kicker of it all: She...

I recently acquired an eclipse gt 2006, came with a gearbox with Dog-leg pattern Does anyone know anything about this?,apparently it was automatic and converted to manual, the gearbox looks like the 6-speed, but only has 5 speeds, I need to change the input shaft bearing :(

how can to identify my 4g eclipse gt transmission, I recently acquired an eclipse, but it only has 5 speeds + reverse :pat:, it have a noise and I think it's input shaft bearing but first i have to know what tranmission i have, some body can help me im from mexico, sorry for my bad english

Anyone have any issues with their starter on the 3.8? We've had the car approximately a week. The starter has made a grinding noise twice. First time I thought the wife held the key too long until it did it to me. I'm wondering if it's the starter or a solenoid. The dealer had a solenoid...

Hey guys first time posting, don't know if i'm in the right place or not. But the other day i got rear-ended, messed up the bumper pretty bad so i'm getting a new one, from the pictures ive seen i really like the AIT Blackout-1 Rear Bumper (as seen on AutoCityImports) But i haven't seen anyone...

Ok so i am a new eclipse own (had the car for 4 days now) and when i purchased it, it had a known idle issue. The car is a 2006 GS with the 2.4 all stock. The car will start and rev to around 2K and fall back down to about 1600. Then it will bounce back and forth from 1600 to 2K. Not a fast...

What’s up fellow 4G’ers, I’m looking to play around with my exhaust system again. As some of you know I modified my stock pipe to make it a center exhaust. I currently am running the stock manifold with cats and OEM resonator, but am about to soon install my ceramic coated RRE headers (ive...

Ive decided that my current rotors are damaged some how so I need to get some new ones. I know slotted/Drilled can be a meme but there is actual research to show a slight increase in brake performance so I am going to get Slotted at least but not drilled only. Ive found what I think is a good...