Search Results for ‘intake manifold’

I am attempting to design an intake, and I need help, and I've got a few questions. Does our cars use the throttle position sensor to determine the fuel ratio along side the Drive by Wire accelerator pedal? If not I'm going to see if I can just delete the stock throttle body from the car, and...

Came across this intake manifold from the G4JS: same bolt pattern as the EVO, meant for a 2.4L, runners longer than the EVO but short that the 4G69. Sits a bit taller due to the runner shape(L vs U). I bolt it up to the 4g64 just for reference(nevermind the distributor, it was making it possible...

I know some of you recommended this site in the past, but oh my God. Do not order from these people right now. I don't know what their deal is, but I will refer you to my awesome email thread with them that has spanned since 6/24. Every time it's "one more week". They are being dishonest about...

Hey guys, second up in the series, I have Fuel Injector Development 1000 series injectors. They flow [email protected], or [email protected], which is what we run as factory fuel pressure. I have a set for my own car, and they were all flow matched to [email protected] for example. They are supposed to be...

Hi everyone, hope you all are doing well. So my 07 GT (6-speed) is experiencing two misfire codes. At first, it was P0304, so I checked the front bank of spark plugs and found the plugs and boots to be covered in oil. I changed the valve cover gasket and tube seals on those, and the code went...

This has been an ongoing problem that seems to be getting worse every day. After turning the key I get nothing from the engine, except a clicking noise that seems to come from around the intake manifold, I think I remember starting to hear that about the same time I installed my subs/amp. It...

Was looking at my car and noticed this part on the intake manifold. Was wondering what it did and it's basically an additional chamber for air. I looked at the pros and cons of removing it and it basically said that there are no pros to removing it other than increase noise (if you consider...

Hey all, I'm thinking about ordering some 0.125" teflon sheet to make some phenolic spacers for my intake manifold and throttle body. I wanted to see if anyone else has done this/used the pre-made ones because I'm curious if its necessary to use a regular gasket on both sides such a spacer or...

hello all that remember me, still got the eclipse and has been resting in storage for a couple years (Canadian winters and other summer projects pushed it aside) but finally getting around to continue on building up the spare motor and test fitting all the RIPP hardware on the stock motor that...

Hey! Just installed an Injen SRI, love the sound. I'm addicted. Wanting to swap the TB to the GT model... not sure if i'll send it off or not. Regardless i'm struggling to find the spacers for the Intake Manifold and the TB that I might as well install while i'm swapping the TB. Didn't know...

Hello guys! I am changing the spark plugs next week on my v6 manual and had a couple of questions- 1) Is there a gasket/seal under the intake manifold which I need to change? 2) I checked one of my coils and it had a bit of oil on it, what could be the possible reason for it ? 3) Since I...

Greetings everyone, I’m Bob from Rahway, New Jersey. For starters, as a first ever Forum “Newbie", I would like to express my admiration and gratitude to everyone involved with the contribution and organization of all the useful, top notch information available on this site. If it weren't...

Got for sale a couple of parts for whom might be interested you can pm me here. All prices are shipped unless specified. If send as gift then no paypal fees but if not + 3% paypal 2.4 Cyl Head in good condition, it is shaved 0.020" with valves but no cam. 235$ shipped 4G69 IM with OEM...

Hi guys I'm new to the Eclipse community but not to this earth or modding cars in general. :-) I just just picked up a 2006 bone stock eclipse GT. I was looking under the hood in order to size up the air intake options/install but I noticed a line running from the intake manifold area to the...

Hi I'm Brad I live in Delaware I have an orange 2007 Eclipse Spyder GT I've only done some slight appearance mods I've got an unfinished set of gauges on the A-pillar hoping to buy and finish installing the rest of the gauges I've installed a nice DVD receiver in place of the radio I've...

So last week my Galant was side swiped by a suburban. I was in the turning lane and the other vehicle put her side door right into my passenger side fender. It looked like just the fender and bumper cover were damaged, but apparently there was frame damage. The worst part is that after I pulled...

My '06 GT started this weird ticking noise right around the intake manifold area. I noticed the oil level was extremely low a couple days ago and I've always used Valvoline Synthetic or Mobil 1 Synthetic. It's at 146,000 miles right now. I used to drive it all the time but lately I use it about...

Did a little research and found that aftermarket throttle bodys are cheaper then oem. Does anyone know anything about the throttle body below? Will it work just as good as if I where to put put a regular oem 3.8l v6 gt throttle body on my 2.4l gs? Mouse over image to zoom...

Hi all - I'm selling a custom throttle body spacer made by kingdarin8484. It was on my car for less than 2 years. There's no problems with it and it's in great condition. I only took it off because I was troubleshooting an engine issue that has been solved (problem was due to an intake manifold...

Small items that fit in flat rate boxes includes shipping. Larger items are calculated shipping based on weight. Don't be afraid to shoot OBO's Looking to trade for GT name brand intakes or Rims. 6x WRX 440cc injectors $110 shipped (will not split) SOLD! Upper and lower GT intake...