Mitsubishi Eclipse 4G Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. 2006-2012 Eclipse (General 4G)
    Anyone elses absolutley hate lifter tick. I think there is a little more than lifter tick in this video. Are the stock lash adjusters 1mm or 3mm in the 6g75? If they are 1mm I plan on getting new 3mm ones if they are 3mm I plan on pulling and deep cleaning.
  2. Eclipse Performance
    I'm running the Comp Cam Mustang springs, and I'm getting loud valve train noise. It seems as if the springs are too stiff, and over taking the hydraulic lifters on the intake side of the rockers..... anyone else have this experience? Not sure if I will need to go with a heavier weight oil, or...
  3. Tuning and Electronics
    I've been chasing slightly poor mpg and the power is off from where I think it should be. I've dobe a few tanks of cleaner and sea foam. Checked plugs, which looked great but I replaced anyway,* vacume leaks and all the basics. Car - v6, SRI, Open exhaust, gutted stock exhaust manifolds,*...
  4. 2006-2012 Eclipse (General 4G)
    i Noticed when i was warming up my car the other day i heard a "ticking sound" taught it was the injectors but clearly it sounded a bit different can notice it more from the drivers side. i don't notice it while I'm driving. AHHHHH i hope I'm just paranoid. low miles on a new car and this. hope...
  5. 2006-2012 Eclipse (General 4G)
    I got off the phone with my Mitsubishi mechanic, and wanted to get a scheduled timing belt change done. I mentioned that I also needed the valve lash adjustment done, as I did not see it on the service records. He told me that the intake side is the only side that needs adjusting, and that me...
  6. 4G Eclipse GS/SE Specific
    So I'm gonna be tackling adjusting my valve lash tonight, but I have one quick question. I have seen 2 different threads stating different measurements that are needed for this, can someone let me know what is correct? 20mm intake/30mm exhaust 11mm intake/20mm exhaust Thanks!
  7. Problem Reports
    adjusted valve lash today. doubled checked all gaps .008" intake and .012" exhaust. took it for a ride feels perfect. i assume the lifter tick noise is supposed to b a bit louder after the adjustment seeing that i had to make the gaps a tad bigger. just want to make sure that the louder ticking...
  8. Problem Reports
    Did the valve clearance job myself yesterday but ran into some trouble. 1) I think I tightened the screws a little too tight. 2) I don't have a torque wrench so I just tightened the bolts good, making sure to keep the .20mm intake/ .30mm exhaust. Is the torque wrench absolutely necessary for...
  9. 2006-2012 Eclipse (General 4G)
    I searched but couldn't find a good answer for this. I need to know have it done by a professional, so I was wondering how many hours this job requires. And how much should it cost? I tried to do it myself, but I didn't do a very good job - only made it noisier. :sad:
  10. 4G Eclipse GS/SE Specific
    Hi everyone, Since i had problems with installation for HIDs on my lancer and my posting this to help persons who gets the same problem as this.Some HID kits(H13) are coming with a 9008 wiring because the kits are made for 9008 and H13...and most compagnies don't even know how to...
1-10 of 10 Results