Search Results for ‘latch’

hey all! you probably do not know me but I recently had my eclipse rebuilt with the help of my grandfather and now I have a vengeance for the streets. I'm going to do everything I can to it and I need help from people on this forum because my education and google aren't enough. Since I'm in...

Alright so my hood latch broke last week, and I am unable to find a replacement anywhere that ships to Canada. Was wondering on people's thoughts of installing Locking hood pins in its place. Hood is the OEM steel hood not a carbon fiber or Fiberglass.

Hey all, I have been trying to open the hood for two days. I have cut out the upper grills so I have full access to the hood latch assembly. I have seen people saying use a screwdriver to get leverage, however I do not know where to put it and in which direction to put the force. I also...

Greetings all new here - just bought a 2006 GT/manual. Absolutely love it! It came with a new driver's side door latch - owner said it needed it for the power lock to work. Is there a good write-up here for ripping into that door panel? Lots of bolts! LOL... I've been searching for a...

Hello I am a newbie to club4g however I have used it for quite some time. I have had two Eclipse GT convertibles an 01 that had 200,000 on the odometer when I sold it (never had a problem that I could not resolve) and my current 07. Unfortunately this one does have a problem, the top will not go...

Hello I am a newbie to club4g however I have used it for quite some time. I have had two Eclipse GT convertibles an 01 that had 200,000 on the odometer when I sold it (never had a problem that I could not resolve) and my current 07. Unfortunately this one does have a problem, the top will not...

My convertible top is not opening because a steel strip connected to a microswitch is broken and needs to be replaced. The thin strip of metal about 2mm wide but when bent it needs to spring back to it's original shape. I have marked the steel strip in the image. When the latch opens the metal...

Hey guys... I have a 4G eclipse and the trunk latch is not closing. I know why.. because it was sitting all winter and water got in on it and now it is rusted. Rather then spending $150 for a new one, I want to try removing mine, sand and clean it up and try to get it operational again. Is it...

I have a 2009 Eclipse Spyder GS, and have had an intermittent problem (until yesterday) with the top since this past July. When the problem happens, it occurs in one of three ways. 1. The top will stop at some point in raising or lowering and beep. Then it will complete after pressing the...

Hi there, Long time reader, first time poster. I have a 2011 Eclipse Spyder GS - finally got some warm weather here in Ontario and I decided to go cruising with the top down - and I love it :D My issue is that the latches that swing in and secure the convertible top to the windshield appear...

My 2008 Spyder GT top just stopped working. Thankfully it is closed. It was working fine and then started beeping and flashing intermittently. It just stopped working; Open and Close switches do nothing, but when opening the driver's side top latch, the car beeps and indicates the top as OPEN...

Welcome to my first How to :cool2: I hope this serves his purpose and helps a lot of people in here. Read the full instructions before attempting this. Tools: * Screw driver (- , + and T30 Tips) * Ratchet and a small extension for it. * 10mm to 16mm sockets we are only going to use 2 (10mm...

anyone else with an aftermarket carbon fiber hatch having trouble getting their hatch to latch? it is a 2 stage latch, the first stage is easy to get but then the hatch has a fair size gap and afraid that when i am driving it may let go. To get it to latch proper at the 2nd stage i need to push...

Hey im looking for and upper radiator support with hood latch attached. I took a deer at 60mph and still rebuilding. so If u got one hit me up!!!!!!!!!!!!!:headbang::headbang:

I'm negotiable on all prices or if you have something to trade I'm good with that too. call/text/message/reply if interested. Cell: (201) 232-0542 Stock exhaust manifold $50 + shipping One stud snapped on the bottom so you just need a bolt and nut to tighten it down, actually works a lot...

I realized that I use this club a lot for many questions I have, but I have neglected to post anything. So I am going to share with you my hood pin install. I bought a carbon fiber hood from a friend (its the AIT RRS I think is the name) and the latch that came on it was kind of off, so we had...

ok so when i pull my door handle, the glass slides down to open the door but the latch doesnt open. i tried taking off the door panel and now i cant take out the metal mask thing behind it. the bolts will not come off. do our cars have the rod that when you pull the handle, the rod pulls on...

i am having problems getting my glove box to open, the latch still pulls out but doesnt make a click sound or open, ive searched threads and couldnt find an answer, any advice 4gers? its bad enough we have such little storage components in our car as is now i have no glove box:banghead::eek...

As some of you may know I got a stray bullet through my hood at work one night last week and I need a new hood..now there are some hinge I'm looking for..1st want the hood to be black if possible but if not may still work because I may be repainting the whole car. 2nd if it is a carbon fiber...

IMPORTANT: let me be clear....if you are out of town buyer and want me to meet you halfway expect 2 things....you are paying for my gas and payment will be expected via paypal upfront....not taking the chance of driving an hour or two for you to stiff me. Also don't expect me to drop everything...