Hey everyone. First time on the forum but I’ve browsed around before many times without an account. Anyways, I used the search function and couldnt really find what I was looking for. I’m wanting to upgrade my headlights and bulbs but I wanted to get some good recommendations before pulling...

So for a while I had been feeling something that I couldn't quite describe, It felt like it was coming from the front left of the car usually would start too feel it at around 30-35mph an it would stop anywhere between 40-55mph. I first thought it was something to do with wheels/ suspension so I...

So my cars been sounding weird I believe there is a hole in the front y-pipe. would it be best for me to replace just the y pipe or the whole front exhaust manifold and y pipe? Any suggestions or links would be helpful thank you

I have a 2006 GT 3.8L that had D2 Coilovers installed on front and rear when I bought it. After taking a look at the suspension I noticed the front sway bar is not connected on either side to the coilovers- it's just sitting on the frame of the car. I know I need to get end links in order to...

So Photobucket has been an issue for a LONG time now with them not allowing images to show up unless you have a membership with them. We found a fix for it in the past, but currently, they've changed things ONCE AGAIN to make them SUPER blurry. Admin, this post is specifically for you or...

I was recently informed that my engine mounts are all but shot, and now i need to find new ones. I hear that Polyurethane mounts are what most people swap to when upgrading. However I have not yet had the chance to research into finding new ones. If they do make Polyurethane mounts a 2.4L I4 GS...

If you are in the Tri State area, Do not use a speed shop called Procom. Overpriced and they are lying thieves that can't even do a job right. My car is currently on jack stands until I get a new end link and rim. All because they charged me for coilover adjustment, I told them to adjust both...

Hey guys I'm trying to track down a thread or set of instructions that go over how to remove the reverse lockout. Originally, I remembered seeing these instructions for the TWM short throw for the 6-speed but it appears they've discontinued that product and the links to the original...

My car is currently lowered on springs. I was going to put the stock springs back on. The sway bar link attached to the strut is held on by a bolt with an allen key inside. I was trying to remove it by holding an allen key inside while undoing the outside bolt with a wrench and pipe. I loosened...

I have a 2008 Eclipse GS. I'm having trouble with my lock actuators. I have been unable to find a maintenance manual at the local parts stores. I've purchased the actuator motors to rebuild the actuator. However, I am having trouble removing the inner panel of the door. When I remove the...

Hey guys, "new" here....I have lurked from behind a screen since Aug of 2014 and watched you all...lol jk but I did take a lot of advice on our cars along the way and the builds on this site are why I went ahead and kept my car instead of trading it off after the wrecks...yes there were a...

FS: Ross Racing Pistons & Brian Crower Rods, 6G75 *sold* 04/27/19

My "NEW" 4g Mitsubishi Eclipse - wrapped at Coastal Glass in Stephenville, NL, Canada Hi everyone, It has been a while since I last posted. I have been busy. I have been a huge Eclipse/Talon fan since 1992 and finally got my hands on a 4g eclipse last year. Been posting around the forums since...

Hello everybody, I've been getting PMs from people who have received a message from a user named MAALI417 offering free OBD2 scanners to test in exchange for a review to be placed on our forum. Don't let your excitement get ahead of you, this is considered suspicious and is NOT something that...

A couple of months ago I was in need of a backup vehicle. I found an original owner 06 GT Eclipse with 83k miles. 4800 $. I named it the Scalded Dog, because it runs like one.The original air induction system and the suspension have been replaced. It has cold air induction and adjustable coil...

New member on the forum, but not new to the eclipse. I own a 2006 eclipse GT 3.8 6 Speed with all the basic bolt one (Headers, exhaust, and intake) nothing to special. I'm looking to either do a supercharged build or turbo build. Im Trying to get a good understanding of what is needed to do...

This is my first mitsubishi out of 40 or so cars I've owned. A stock 2006 GT auto with 76K miles. It will be a slow build as of now since money is tight. Trying to get all the issues and maintenance done first. Started out with a creaking in the back, has turned into a constant full blown...

When we first got our car about two or three months ago it had a creaking sound in the back. Now it's progressed to a constant full on clunking. I was thinking bad bushing somewhere or sway bar links. It took me a few tries because the car stops doing it whenever I try to look for some reason...

Hey guys, I'm new here. I finally bought a 4g a few weeks ago. I bought it knowing that the clutch was on its way out. It has about 74,xxx kms on it. I wanted to know, what type of clutch kit (stage, and brand?) should I go with? I'm looking to eventually do some mods to it (CAI, exhaust...

Hey all, I've been scouring the forums here for a solution, but I've come across a lot of mixed reports in various threads. This seems to be a sort-of common issue. Model: 2008 GS (everything stock), 95,000 miles, all my own. Problem: Rattling/Whirring/Shuddering noise when clutch pedal...