Search Results for ‘long tube’

Hi from Germany, can anybody measure the distance between the front upper and lower O2 sensor ! and if possible the rear too !? I have the obx long tube headers and i want to put the lower sensors back in place . Thanks for ur time. Greetz Markus

Hey guys, I tried searching for this specific question, but I can't seem to find exactly what I'm looking for. Right now I have a muffler delete and it sounds nice, but I plan to get the OBX long tube headers soon. My question is, would the headers sound better with a straight pipe to, say, an...

I'm looking to buy a nice pair of ripp long tubes.

$$SOLD$$ $$SOLD$$ $$SOLD$$ $$SOLD$$ For sale, piping does have plenty of scratches on it, otherwise fully functional. Intake can be converted to short ram, or long tube. Original AEM Air Filter is very clean, and has a lot of life left on it. Sale will include original box, and AEM paperwork...

All Weather Floor Mats New $70 (Shipping included) Carpet Floor Mats New $ 60 (Shipping included) Trunk Mat without sub New $60 (Shipping included) Eibach " Anti-Roll Kit (Front Sway Bar) New $125+$15 (shipping(estimate)) TANABE Under Brace (Front) New $90+$15 (shipping(estimate) OBX Long Tube...

i bought some long tube headers and was reading about the harness extensions that were pretty much plug-play...the ones i found on here are not sold anymore on the website the links took me too...i was wondering if anyone had these and the make/model that was purchased so i can pick some up

Installed my headers yesterday started driving to the muffler shop and engine died and it won't start back up anyone have this problem before

ok guys i have a set of rre short tube headers 4 sale. 2400 miles on them great condition. sold my car. i also have a front strut bar and rear floor bar for sale and long tube intake.the rre headers usually have a long wait time to get due to they only make so many at a time. willing to go 350...

so iv had my OBX long tube headers and AEM CAI with just a straight pipe exhaust to a magnaflow muffler set up for like eehhh about 2 years now and it kinda seems like my gt isnt has powerful as she used to be. idk if its cause i bought a ls integra to boost back last jan or what but she doesnt...

Have a question for yal I have obx long tube headers I have to admit I lost low end torque so I was thinking should I get a short ram intake?

Hello, could use your help I installed my obx long tube headers I reset my ecu and it still feels like I lost torque I'm getting an injen cai in about a week or so my question is do I get the cai or the short ram intake to get back the torque I feel I lost I know it can be converted if so what...

Hey Guys :D I have an oppertunity to get OBX long tube headers for around $250 and i wanted to know if its worth it or not. I do plan on getting a Injen SES catback exhaust system within the next month (need money ). If i do get anything ill have it installed a shop since im clueless on...

Was reading the difference between the both correct me if I'm wrong short tube headers are 0-60mph? Long tube headers are for like longer distance? I want something that will give me the most if I'm riding around weither it be in town or the highway etc if somebody pulls up to me and wants to...

06 gt with Obx long tubes n magma flow cat back. The front header at the flex / mesh pipe keeps leaking. Ordered a 2nd set of headers to see if would fix it only to have a few weeks later leaking again same spot. Any ideas on why or how to fix without dumbing another couple hundred...

So I heard a while back that one of the sway bars did alot for the car. I can't remember if it was front or back that made the biggest improvement . Anyone know ? Had been told that if you run after market sway bars with long tube headers they rub . I had heard a couple times the under brace...

hi there im going to be ordering the obs long tube headers and will be installing them shortly. i know the obx headers need spacers like the RRE's aswell as o2 extensions. my next question is which o2 spacer should i be getting? ive seen people with the L shaped RRE's aswell as 18mm spark plug...

So i had half the rear header out when I see the Exhaust doesn't match up to the header. I thought these were bolt on do i have to cut and weld these to my Exhaust?

ok iv been running obx long tube headers into a decent 2.5 inch pipe leading to a nice magnaflow muffler, i was just wondering if anyone on here has done this and then switched to a real exhaust and gotton any better performance (i dnt care about noise or anything regarding this) so yeah wasnt...