Mitsubishi Eclipse 4G Forums banner

manifold

  1. 4G Eclipse GS/SE Specific
    Came across this intake manifold from the G4JS: same bolt pattern as the EVO, meant for a 2.4L, runners longer than the EVO but short that the 4G69. Sits a bit taller due to the runner shape(L vs U). I bolt it up to the 4g64 just for reference(nevermind the distributor, it was making it possible...
  2. Forced Induction & Nitrous
    I have been looking around and it seems that RRM makes turbo kits for the 2000s lancer ralliart that shares the same engine, 4g69, with us. They also make performance parts for the 4g69, like port and polished intake manifold, and turbo exhaust manifolds, that in the site, they say it fits the...
  3. Good Guys/Bad Guys
    I know some of you recommended this site in the past, but oh my God. Do not order from these people right now. I don't know what their deal is, but I will refer you to my awesome email thread with them that has spanned since 6/24. Every time it's "one more week". They are being dishonest about...
  4. Problem Reports
    I have a 2009 with the 2.4L that after pulling into the driveway the other night the check engine light came on and it started idling rough as hell. I shut it off and restarted it. It started back up but ran rough as hell, tach was at around 1000rpms but it felt like 150-200, it would finally...
  5. 4G Eclipse GT/SE Specific
    So my cars been sounding weird I believe there is a hole in the front y-pipe. would it be best for me to replace just the y pipe or the whole front exhaust manifold and y pipe? Any suggestions or links would be helpful thank you
  6. Member's Videos
    In order to rebuild an old, rusty motor, you need to go through every single component. As a matter of fact, you'd be better off replacing factory parts with aftermarket goodies. On a Hummer H3, replacing the stock cast iron exhaust manifold is a necessity, due to it being prone to cracking...
  7. 4G Eclipse GT/SE Specific
    Hey fellas, just got my car back after having some work done do it. (Injen CAI, RRE Headers, Energy motor mounts, ebiach pro kit lowering springs and magnaflow catback exhaust) The shop told me they had to delete the pipe connecting the RRE manifold to the EGR as it would not line up. My EGR...
  8. Automotive For Sale/Wanted
    Hey guys, second up in the series, I have Fuel Injector Development 1000 series injectors. They flow [email protected], or [email protected], which is what we run as factory fuel pressure. I have a set for my own car, and they were all flow matched to [email protected] for example. They are supposed to be...
  9. Problem Reports
    Hi everyone, hope you all are doing well. So my 07 GT (6-speed) is experiencing two misfire codes. At first, it was P0304, so I checked the front bank of spark plugs and found the plugs and boots to be covered in oil. I changed the valve cover gasket and tube seals on those, and the code went...
  10. 2006-2012 Eclipse (General 4G)
    Tried to replace starter this weekend on my 2010 GS 85k miles. When attempting to remove the O2 sensors from the exhaust manifold to get the heat shield off, only one sensor would come out. On the stuck one, i ended up using almost an entire can of PB blaster, a torch, some big leverage bars...
  11. Performance
    I just wrote up a guide on my other website. Here's the link How to: 4G63 manifold | 4G World I plan on putting lots of guides up there on stuff that people say are impossible here. Have fun, happy modding.
  12. 4G Eclipse GT/SE Specific
    I remember reading this in a thread once but I can't find it now. Can anyone tell me what the size of the intake plenum/manifold is on the GT and if it can be bored to 70mm? Thanks guys
  13. Forced Induction & Nitrous
    Hi guys, I thought someone may be interested in this build I am currently completing. It is a Lancer (Australia) with the 4g69 engine. After considerable research I could not find anyone who built a top-mount turbo setup, I may be wrong...but having built hundreds of turbo setups in my...
  14. Eclipse Performance
    Anyone have any luck with O2 sensor simulators. Need to pass inspection, but don't have the $1200 to dish out for a manifold cat just yet. Looking for a temp fix to get passed.
  15. 2006-2012 Eclipse (General 4G)
    So I just received the my new RRE header for my 2.4 Eclipse and I was hoping to replace the rusted bolts studs coming out of the cylinder head that you slide the top 6 holes in the exhaust manifold onto...... now I’m not sure how difficult that would be while having it in the car because I...
  16. Automotive For Sale/Wanted
    I haven't had my eclipse for a few years now so wife wants me to get rid of remaining parts. I have the following items. PM me if you have any questions, need additional pictures or are interested. All parts are from a 2006 GT 3.8L. 1)Mitsubishi (1570A962) - Cross Over Pipe - $50 + $15...
  17. Problem Reports
    2009 2.4. 130,000 miles Background: changed timing belt/balancer belt. Original tensioner left in it. After 5000 miles, oil light would flicker during idle. Checked oil level, full, didnt worry about it. 10,000 miles later, oil leaking on ground. Just maintained oil level for 1 year (2,000)...
  18. 4G Eclipse GT/SE Specific
    Hey everyone. Have a couple questions. I have a 1999 Dodge Avenger with a 6g75 from a 2004 Galant. Runs and drives. Am using the stock 2.5L ECU right now and dizzy. The engine seems to take too long to start when initially cranking. Ignition system is brand new. I was thinking that maybe I...
  19. 4G Eclipse GT/SE Specific
    Hey guys, I spent some time digging around this forum, and others with 75 info - I couldn't really find the info I am looking for I was wondering how high anyone has tried running the stock 75 valve train, NOT the stock 75 as a whole, but specifically the Valvetrain, springs/retainers - if they...
  20. 2006-2012 Eclipse (General 4G)
    Hey everyone, I'm a bit new to this forum. First off, I have a 2007 GS with a 4g69. Its got about 98k miles on it, and has a pretty bad exhaust leak from the front pipe. Cracked at the middle of the "Y' and has two holes right next to em as well. Not to mention, signs of leaking gaskets at just...
Top