motor

RockAuto is excited to announce the addition of US Motor Works (USMW) - Professional Series parts to our catalog! USMW has over 50 years of manufacturing experience and specializes in Fuel Delivery and Cooling products. USMW Professional Series Max Cooling Kits (found in the RockAuto catalog...

Does anyone have a trans mount for a 3,8L 6 speed for sale? I have the energy suspension poly bushings but when I installed it, I followed the directions not realizing the directions are for the 3g cuz it also works with the 4g 3.8 6 speed only from Auto city imports so I removed the bushing...

In order to rebuild an old, rusty motor, you need to go through every single component. As a matter of fact, you'd be better off replacing factory parts with aftermarket goodies. On a Hummer H3, replacing the stock cast iron exhaust manifold is a necessity, due to it being prone to cracking...

Perfect for a turbo build, the kits are available once again. This new kit is very similar to my old kit, however it reflects the price changes in the last 4 months, and now includes ARP head and main studs. These are all parts I have personally tested and abused. I have my motor happily revving...

Hey All, I am in need of the Transmission Motor mount Driver side. None of the part houses have it and i can't find it. I have two photos below. If you have one or know where i can get one would be appreciated. Car is a 2006 Eclipse GT 3.8L Manual Trans Looks like i can't post URLs yet but...

Flywheel Issues 2006 GT v6 MT Hi, I have a 2006 Eclipse GT 3.8L Manual Trans and have recently pulled the flywheel and was going to replace it when i noticed there were no shims. It had been burning up starters and this may be the reason from what i've read. One guy listed part #MD365781 and...

I am readying myself for the next order and have come to my next ?'s I'm planning on getting energy suspension motor mounts I see they have control arm bushings are they worth getting also I want to replace the ball joints what is everyone's opinion on these MEVOTECH Complete Arm w/ Ball Joint...

Hey fellas, just got my car back after having some work done do it. (Injen CAI, RRE Headers, Energy motor mounts, ebiach pro kit lowering springs and magnaflow catback exhaust) The shop told me they had to delete the pipe connecting the RRE manifold to the EGR as it would not line up. My EGR...

hello again! When I purchased my car the window was stuck half way down. I took the door panel off and wound the regulator up as high as i could and put it back together, its about in the same position as before. My question is, do you think its the motor, or the control panel? I actually seen...

hey guys, after running my a/c for abut 45 minutes today the fan stopped. I turned the car off and let it sit for 15 minutes and it started back working. everything else works fine, you can hear the idle drop when ac is turned on, no flashing lights, all the fan speeds work when it does work...

I almost didn't get to rent a harmonic balancer removal tool today from orielys because I broke the social distance rule. :69: they are serious! Yall be safe out there. Im a newb on here but plan to be as useful of a member as I can be while I own a 4g motor. I feel like I put a lot of...

My 2007 Eclipse has bad rod knock and instead of fixing it, I'm looking to just sell off as many parts as I can and get a bigger car. So anything you need, interior/exterior/internal parts, I can snag it off the car and give you a good price for it. Everything is in good condition besides the...

Alrighty, So as I have postponed or rejected the turbo idea due to the fact that I want this car to remain as a fun daily and don't want to really risk it's functionality. I am back to bolt ons. I know the headers are the top pic for the 6g75 but I have been doing some thinking. I was thinking...

I'm asking for opinion from some of our more advanced wrench turners out there. I've been watching a lot of reviews on the new TorqAmp electric turbo and I have to say, aside from the price, it looks really interesting. I am not real sure if our GT motor (6G75) is considered a "low compression"...

Hello, I braked hard in my car and now I have a low rubbery creaking skipping sound.. Taking it to Midas tomorrow, but so far my friends have looked at it three times and can't figure it out. Adjusting my brake hardware on the front passenger wheel made it quiet for a couple days but it came...

Hopefully someone has an answer for my really obscure problem I've been troubleshooting. So I just did an engine swap, and now when I turn the key to "On", power is alright. The ECU is getting 12v, ECU grounds are good, body grounds are good, trans ground is good. However, when I turn it to...

Hey everyone, Can someone carefully explain to me why I can't just go on eBay and buy a shitty civic turbo kit and slap it on my eclipse with some custom fabrication and placement? Nobody has told me that this wouldn't work, I'm just assuming so because that would be wayyyy too easy. The kits...

Howdy from Madison, WI. Made my way here after looking for solutions for a fan not working properly. Thread about replacing a bad blower motor resistor fixed the problem and seems there are a lot of good threads here. Have a manual 2007 eclipse GS, have had it for about 3 years now. Looking...

So the 4G is exactly like the BMW 850CSi, in that when you open the door the window drops a few mm, then raises up a few mm when you close it so that the window gets a good seal. The other day at work it was monsoon-level raining. When I got in my car to leave at the end of the day and closed...

Hey! I was wondering if anyone knows how to replace the outer race bearing on the F5M42 transmission? I'm assuming that's the same transmission the 4g69 Eclipse has, right? I drive a 2004 Lancer Ralliart with the 4g69 motor and I lurk here since it is more active than the Lancer forums...