Hey Everyone. Wanted everyone to know that Boosted Fab (Boostedfabrication.com) you can now order custom Poly Engine mounts to replace the Hydraulic mount for both GS and GT. As well as the Trans mounts for the GS and GT. I'm running them both along with the Energy suspension Bushings on...

Hey everyone, I've been working with a custom engine mount fab shop out of PA called Boosted Fabrication. If you follow my IG @rennasgarage, you will have seen the custom engine mounts he made for my GS. It definitely makes the driving experience much more precise. It feels like I have less...

I'm drenched in confidence today, although that might be baked on sweat because it was 90 degrees outside. I just performed my first modification on my darling Eclipse and fitted her with a cold air intake! This is probably pretty commonplace around these parts, but for me this is only my...

Does anyone have a trans mount for a 3,8L 6 speed for sale? I have the energy suspension poly bushings but when I installed it, I followed the directions not realizing the directions are for the 3g cuz it also works with the 4g 3.8 6 speed only from Auto city imports so I removed the bushing...

Even if you don't visit a race track often, replacing your stock seats is a great idea. They can increase safety, improve your driving experience, and give your interior aggressive, sporty look. However, mounting them can be a daunting and intimidating process. You will need new seat mounting...

I am readying myself for the next order and have come to my next ?'s I'm planning on getting energy suspension motor mounts I see they have control arm bushings are they worth getting also I want to replace the ball joints what is everyone's opinion on these MEVOTECH Complete Arm w/ Ball Joint...

Hey fellas, just got my car back after having some work done do it. (Injen CAI, RRE Headers, Energy motor mounts, ebiach pro kit lowering springs and magnaflow catback exhaust) The shop told me they had to delete the pipe connecting the RRE manifold to the EGR as it would not line up. My EGR...

FS 2008 White GT manual stock 130K $3500obo Indy, IN I have a White 2008 GT manual all stock for sale. I bought this car as a fix-em-up but I don't have the time or money to finish it up. I replaced the front and rear motor mounts (roll stoppers), inner and outer tie rod ends, the exhaust...

Hello, I braked hard in my car and now I have a low rubbery creaking skipping sound.. Taking it to Midas tomorrow, but so far my friends have looked at it three times and can't figure it out. Adjusting my brake hardware on the front passenger wheel made it quiet for a couple days but it came...

I'm selling my used OEM foglights (including stock halogen bulbs & bumper mounts), a new foglight LED conversion kit that I purchased and didn't get the chance to use, and an extra set of new 6000k SirusLED bulbs. Selling all of this because I've given up on making my foglights work with my new...

2007 Mitsubishi Galant Ralliart, 169 500 miles $6000 OBO Located in postcode CA 91405. Selling because I'm about to have a kid and just got a new family car and don't have room for this too :( Mods: Ingalls stiffy torque bar K&N typhoon air intake k&N washable cabin air filter installed...

I was recently informed that my engine mounts are all but shot, and now i need to find new ones. I hear that Polyurethane mounts are what most people swap to when upgrading. However I have not yet had the chance to research into finding new ones. If they do make Polyurethane mounts a 2.4L I4 GS...

Hi just wanted to show my 5g mirage swap in process everything is bolted on just need a driver axle and get a new ecu since the one i had i burned it Have custom mounts building it for drag racing and maybe for meets.. if you want to follow the build you can follow me at instagram as: 6g75_tek...

Didn't see a step by step so I thought I'd help out. I did not disconnect exhaust. But you may have to depending on your setup. Step 1 is get a jack with a piece of wood on it and support the transmission. Step 2 is remove the rear two bolts on the centermember. Step 3 is remove the...

Well here is what is up next for Red October. Only because i cant afford Coilovers. Hell i cant afford this either but ill have to widdle away at it after I find out if im getting a pacemaker or not. Wheel bearings are an absolute must dont know how much longer these ones will last. Then axels...

Hey this is my first time posting here!!! I have a 07 spyder gs. I want to get some poly insert mounts to replace the OEM rubber ones since they re all done but i really cant find any information about size of the mount, if they are all the same size (transmission, front, back and passenger...

Please help new to forum I have a 2008 eclipse with a 3.8 litter v6 trying to replace the converter against the fire wall ,I have got it loose but cannot for the life of me been able to remove it from car above or below have removed all bolts from. Engine mounts and tried lifting engine as much...

Im new to the forum so forgive me if I'm making a mistake here. Im working on a 2008 Eclipse 2.4L with a standard trans. The car was not shifting and slipping under load. Also, it was making a horrible grinding sound. I read about the transmission issues so i decided to pull the transmission and...