Mitsubishi Eclipse 4G Forums banner

oem

  1. Automotive For Sale/Wanted
    I have not been here since I sold my car years ago. While cleaning up stuffs from my basement to be put into my newly installed shed, I chanced upon some items conveniently stashed underneath a table. You can tell from the images what those items are. See the dates included in the picture - that...
  2. Automotive For Sale/Wanted
    I have quite a few things I've been upgrading on my car and I'm starting to just have a shelf in my garage of car parts, so I'm looking to get rid of some of them. The parts are as follows and will be adding images with proof of me as soon as I take them and inventory them in this post. Any...
  3. Interior and Exterior Modifications (Show)
    I am in the process of installing fog lights on my eclipse, and I bought an aftermarket switch. The OEM fog light harness has four colors on it: light blue, black with dots, black with yellow stripe and green with white stripe. Does anyone know what each wire does, so I can splice it into the...
  4. New Members Forum
    Hi folks, my name is Paul and I’ve recently inherited a 4G Eclipse. The details: 2006 Eclipse GT 6 speed with about 110k km (about 68k miles). Typhoon K&N intake. Some kind of aftermarket headlights (they’re bright and seem to work well but are not completely wired up, project for another...
  5. 4G Eclipse GS/SE Specific
    For the life of me I can't find OEM strut assembly for the 2006 Eclipse GS? I found a few options but they're like $200 PER assembly... Would OEM strut assembly from a 3G work? Also I found this a coil over kit for $320; This includes all four corners... brand new full assembly Was curious if...
  6. 4G Eclipse GT/SE Specific
    I've had RRE headers a few years now, and the car is running better than ever. At some point soon tho, I have to assume the 3rd cat will start to clog and fail due to age and especially since running headers. So 2 questions, 1) what are symptoms of a failing 3rd cat? 2) I'm inclined to...
  7. Automotive For Sale/Wanted
    All I have left are these taillights, everything else has been given new homes. They are used, but are not scrached or chipped. They may need resealed, as they had started sweating inside the lens on muggy days, but I am not sure. $50 takes them.
  8. Wheels, Tires, Brakes and Suspension
    I have newer EBC rotors and OEM pads (<3k miles) and fairly new brake fluid (ATE 200) and considering swapping front pads for track day. I've heard that this can cause major rotor warping, and also that it's perfectly fine as long as both get proper bedding (street to track, track to street). My...
  9. Current Car Of The Month
    Congratulations to Steve_06_Ark for being the first to step up for the special edition COTM, saving me from picking! https://www.club4g.org/board/interior-exterior-modifications-show/119289-06-gt-multiple-modifications.html 2006 GT (Silver) Automatic Mods: AEM cold air intake, RRE...
  10. 2006-2012 Eclipse (General 4G)
    Hey guys, I need some advice on what could be causing this. 2006 GT: I put on new shocks and struts last year (OEM, and yeah, that cost a lot more than aftermarket but I liked the original ride). I put new brake rotors and pads, and replaced failing front right caliper. I replaced the 17"...
  11. 4G Eclipse GS/SE Specific
    For those of you that have replaced the OEM airbox with aftermarket ram tubes/air filters, and still have it sitting on your shelf collecting dust. I'm looking for the OEM air box Mitsubishi P/N MN180007. https://www.mitsubishipartsnow.com/oem-parts/mitsubishi-air-cleaner-body-mn180007...
  12. Automotive For Sale/Wanted
    Perfect for a turbo build, the kits are available once again. This new kit is very similar to my old kit, however it reflects the price changes in the last 4 months, and now includes ARP head and main studs. These are all parts I have personally tested and abused. I have my motor happily revving...
  13. 4G Eclipse GS/SE Specific
    Alright so my hood latch broke last week, and I am unable to find a replacement anywhere that ships to Canada. Was wondering on people's thoughts of installing Locking hood pins in its place. Hood is the OEM steel hood not a carbon fiber or Fiberglass.
  14. Problem Reports
    So I had a code on my 2006 mitsubishi eclipse gs 2.4 L 4 cylinder. Where it said Catalytic converter warm up efficiency was bad. I was told it could be one of a few things. The MAF sensor (I replaced it, and made no change) the catalytic converter was bad, or that it was the downstream oxygen...
  15. Interior and Exterior Modifications (Show)
    The molded carpet in my 2009 GS is starting to show some wear and wanting to replace. Did some searching and apparent that might not be possible since I was only able to find a dealer that went up to only 2005. Is this a hard truth that no one is out there offering an OEM replacement for the 4G...
  16. Cars For Sale/Wanted
    2006 Eclipse GT, 3.8L V6, 6 speed manual Transmission 138,000 miles. Garage kept , in excellent condition. $6200 OBO Factory four piece Aero Body kit Premium Sport package Inc: Power Sun roof, black leather interior, heated and powered seats. After market extras include: Exedy clutch Fujita F5...
  17. Vendors
    ACDelco Filter Rebates: Save even more on RockAuto's reliably low prices! From now through the end of June 2020, take advantage of ACDelco rebates on select Air, Engine, Cabin Air, Fuel, and Oil Filters. Get the fit, form and function you expect on these important maintenance items. Hengst...
  18. Driveline
    In the exploratory phase of auto to manual swap and have a few questions. The shop that's been doing my suspension has done this swap before (4G MT swapped to Galant) and is onboard to help with the install. I've following salvage titles on erepairables.com and someday will find a donor car...
  19. Automotive For Sale/Wanted
    I have a set of 87mm 4G69 pistons, never been used. They're ~U$650 retail, I'll sell them U$575 shipped in continental states or Canada provinces. These are the extreme duty ones, not the standard forged pistons I didn't use them because I wanted to get perfect piston to wall clearance for my...
  20. Automotive For Sale/Wanted
    This post is old. Find the updated one at the link below https://www.club4g.org/board/automotive-sale-wanted/120507-4g69-build-kits-pistons-rods-bearings-studs.html#post1915771 Hey guys, So first up in my series of kits I'll be selling, I have 4G69 engine build kits! These will be to support...
Top