Search Results for ‘pistons’

Perfect for a turbo build, the kits are available once again. This new kit is very similar to my old kit, however it reflects the price changes in the last 4 months, and now includes ARP head and main studs. These are all parts I have personally tested and abused. I have my motor happily revving...

I have a set of 87mm 4G69 pistons, never been used. They're ~U$650 retail, I'll sell them U$575 shipped in continental states or Canada provinces. These are the extreme duty ones, not the standard forged pistons I didn't use them because I wanted to get perfect piston to wall clearance for my...

This post is old. Find the updated one at the link below https://www.club4g.org/board/automotive-sale-wanted/120507-4g69-build-kits-pistons-rods-bearings-studs.html#post1915771 Hey guys, So first up in my series of kits I'll be selling, I have 4G69 engine build kits! These will be to support...

It's been awhile since i've posted but i feel the need to give a quick little list of parts required to build the 4g69 for boost. While you can stay around 10 lbs of boost on stock internals if you wanna go past that here is a list you will need. I did the research and will be building soon as...

FS: Ross Racing Pistons & Brian Crower Rods, 6G75 *sold* 04/27/19

Hello! I scored a decent motor from a totalled 05 Outlander AWD and am wondering where to start with my build. So far I've torn it apart to check the condition of the internals: What should my next step be? My build is essentially going to be a stock build and having to smog it every couple...

Looking on a good set of OE pistons. PM me.

Congrats to N-E-O on being Car Of The Month! Modifications: Interior Sony Soundstatus Herz Exterior MADcustoms front bumper APR GTC-200 carbon wing HALO Projectors Engine and Drivetrain Wiseco pistons STD Bore 95.0mm, Stroke 90mm, CR 8.5, Pin 22mm BC rods Sportsman Series w/ARP2000 ACL...

Congrats to N-E-O on being Car Of The Month! Modifications: Interior Sony , Soundstatus , Herz Exterior MADcustoms front bumper Vinyl green apple APR GTC-200 carbon wing HALO Projectors Engine and Exhaust 6G75 Mivec Wiseco pistons STD Bore 95.0mm, Stroke 90mm, CR 8.5, Pin 22mm BC rods...

What is everyones opinion on boring our engines? Dnj makes pistons .20 and .40 over for the 6g75 and I was thinking of doing .20 over. Would there be any problems? Sent from my N9560 using Tapatalk

Hi friends! Continue your project. I wrote earlier that for the construction of necessary engineering approach. That is, first done structural calculations. After that begins the process of compiling details. In this topic I want to talk about the pistons. To obtain a power of about 300 HP (N/A)...

Well I picked up a lower mileage around 70000 6g75 mivec needed it for the heads and crank if there is parts that will be needed let me know. I'm stopping tje motor down as we speak. Block with pistons and rods , a.c. compressor ,alternator,power steering, throttle body. And whatever is need...

Got for sale a couple of parts for whom might be interested you can pm me here. All prices are shipped unless specified. If send as gift then no paypal fees but if not + 3% paypal 2.4 Cyl Head in good condition, it is shaved 0.020" with valves but no cam. 235$ shipped 4G69 IM with OEM...

I have a 2007 gt 6 speed recently my motor spun a rod and was just sitting for about 2 months. Well i finally decided to take on rebuilding the car and bought a engine off of a 2004 endeavor (It was our engine 3.8L V6 6G75 just non mivec). all i needed was the block and all the other parts are...

hi I'm trying to find someone to give me pointers on how to COMPLETLY rebuild my engine. my bottom end was knocking this morning so I'm shooting for a crankshaft bearing.. despite this.. I always wanted to stick a build not bought sticker lol so I need someone that can give me somne...

hi I'm trying to find someone to give me pointers on how to COMPLETLY rebuild my engine. my bottom end was knocking this morning so I'm shooting for a crankshaft bearing.. despite this.. I always wanted to stick a build not bought sticker :topback: lol so I need someone that can give me somne...

If there's any floating around still I would like to buy them. If not I will just order a new set.

Guys, hello from Moscow )) I have already been working with ECU tuning mitsubishi cars , and so at one time I had wonderful people . They had purchased in the U.S. mitsubishi eclipse 4G with the 4g69 engine and they really wanted to install something that could give a boost) And now they had...

Hi friends please im in Very difficult situation about find performance parts to eclipse gt 3.8 v6 like cams, forged Pistons, forged rods...can help me plz?

I am currently doing a turbo build on my 06 GS. I am in search of turbo manifold, forged pistons, fuel injectors, up and down pipe. Honestly everything i have a 18G turbo and HKS ssqv. I am also looking to swap my automagic tranny for the gs 5spd manual, so if anyone has that laying around feel...