Search Results for ‘rods’

Perfect for a turbo build, the kits are available once again. This new kit is very similar to my old kit, however it reflects the price changes in the last 4 months, and now includes ARP head and main studs. These are all parts I have personally tested and abused. I have my motor happily revving...

This post is old. Find the updated one at the link below https://www.club4g.org/board/automotive-sale-wanted/120507-4g69-build-kits-pistons-rods-bearings-studs.html#post1915771 Hey guys, So first up in my series of kits I'll be selling, I have 4G69 engine build kits! These will be to support...

My parts supplier is doing a sale for Black Friday. Details are on his Facebook page while his website is under construction. He's who I used as my source for building my 1000+hp capable 4G69 block, and is who I get my turbo related stuff from now. He doesn't list his full inventory...

It's been awhile since i've posted but i feel the need to give a quick little list of parts required to build the 4g69 for boost. While you can stay around 10 lbs of boost on stock internals if you wanna go past that here is a list you will need. I did the research and will be building soon as...

Hello! I scored a decent motor from a totalled 05 Outlander AWD and am wondering where to start with my build. So far I've torn it apart to check the condition of the internals: What should my next step be? My build is essentially going to be a stock build and having to smog it every couple...

I just opened up my oil pan to find forged rods. Is this normal in our cars? 2007 2.4L eclipse. I was thinking of getting forged rods but if they're already forged, I'm not going any higher than 280HP so this should suffice, yeah?

Im assembling an 09 3.8 Mivec and I’m have trouble finding the torque specs on the connecting rods. The 3.0 and 3.5’s say 37-38 ft/lbs. The 3.8 says like 20 ft/lbs. That doesn’t sound right. I’m assuming there is something I’m missing. I think the mains are supposed to be 74 ft/lbs, but there...

Congrats to N-E-O on being Car Of The Month! Modifications: Interior Sony Soundstatus Herz Exterior MADcustoms front bumper APR GTC-200 carbon wing HALO Projectors Engine and Drivetrain Wiseco pistons STD Bore 95.0mm, Stroke 90mm, CR 8.5, Pin 22mm BC rods Sportsman Series w/ARP2000 ACL...

Congrats to N-E-O on being Car Of The Month! Modifications: Interior Sony , Soundstatus , Herz Exterior MADcustoms front bumper Vinyl green apple APR GTC-200 carbon wing HALO Projectors Engine and Exhaust 6G75 Mivec Wiseco pistons STD Bore 95.0mm, Stroke 90mm, CR 8.5, Pin 22mm BC rods...

So, I have a few problems with my driveline - I think. 2007 GS - 5MTX 1. My gears grind if I shift too quickly. There doesn't seem to be specific gears that do it, but I've noticed it on gears 2,3 and 5. 2. When I let off and reapply gas, there's a jerk each time. When I let off, there is a...

Well I picked up a lower mileage around 70000 6g75 mivec needed it for the heads and crank if there is parts that will be needed let me know. I'm stopping tje motor down as we speak. Block with pistons and rods , a.c. compressor ,alternator,power steering, throttle body. And whatever is need...

Got for sale a couple of parts for whom might be interested you can pm me here. All prices are shipped unless specified. If send as gift then no paypal fees but if not + 3% paypal 2.4 Cyl Head in good condition, it is shaved 0.020" with valves but no cam. 235$ shipped 4G69 IM with OEM...

I have a 2007 gt 6 speed recently my motor spun a rod and was just sitting for about 2 months. Well i finally decided to take on rebuilding the car and bought a engine off of a 2004 endeavor (It was our engine 3.8L V6 6G75 just non mivec). all i needed was the block and all the other parts are...

Hey everyone. My 2008 eclipse is giving some issues. long story short i rebuilt my 3.8L engine a few years ago because i ended up pooching the cranshaft and 4 connecting rods (yay me) lol. so the engine was rebuilt and ran beautiful untill this past summer when i may have run it a little to...

Hey Guys, I'm about to get a new rod for my Mitsubishi 6G72, the maXpeedingrods site have the best choice. Recommended for everyone today！ Link: amazon.com/dp/B00RYGO43C/ Fit for: Mitsubishi 3000GT Base SL Spyder SL Spyder VR-4 3.0 3.0L; Quantity: one set (6 Pieces), Center length: 141.00...

Anyone ever used these rods? I feel that pretty good, Recommended for you today! Link: amazon.com/dp/B00RYGE6SA Here's the specs (for those too lazy to click the link). Fit for: Honda Civic CX DX EX LX HX RT Si Value 1.6L/CRX Si 1.6L; Quantity: one set (4 Pieces), Center length: 137.00mm, Big...

I have a 2006 3.8 liter hatchback. I have ordered a couple different inner tie rods. It calls for a 4422A004 OEM number. It has the wrong thread size. They are the same length and diameter. But the thread on the stub end is to big. Has anyone ran into this problem before? I called in the vin #...

Guys, hello from Moscow )) I have already been working with ECU tuning mitsubishi cars , and so at one time I had wonderful people . They had purchased in the U.S. mitsubishi eclipse 4G with the 4g69 engine and they really wanted to install something that could give a boost) And now they had...

Hi friends please im in Very difficult situation about find performance parts to eclipse gt 3.8 v6 like cams, forged Pistons, forged rods...can help me plz?

I want to start building the internals up so I can turn the boost on my turbo up since I'm currently running 6psi. I am hoping some one can chime in on what to buy as far as the necessary internals go. I have a arp 4g63 head stud 11mm set coming. I am trying to figure out what piston/rod combo...