cold air intake
back wing (was a gift)
custom paint job
custom rims and tires (not shown in picture just got today)
better fuel injectors
custom straight piped exhaust
high flow cats
Hey guys, so my car came with some XXR 530 size 17.8.25 with 205/40/17 up front and 17x9.75 with 215/45/17 in the rear. The tires are pretty stretched, I’m trying to find a good setup that has the best performance to look ratio, but can’t decide. Any suggestions?
Perfect for a turbo build, the kits are available once again. This new kit is very similar to my old kit, however it reflects the price changes in the last 4 months, and now includes ARP head and main studs. These are all parts I have personally tested and abused. I have my motor happily revving...
I havent been on the forum for quite a while but I thought I'd drop my ride and where it is at the moment from where i was about a year ago. Black headlights and taillights, projector style eyelids, RTX R-Spec Zeniths, R1 Concepts drilled and slotted rotors, GodSpeed MonoSS Coilovers, Injen CAI...
I've creeped these forums for a couple of years since getting my Eclipse for ideas on what's working for others and what I should avoid.
About a year ago I saw both the AWD Eclipse that's been created and a video on a Civic Type-R with in-hub electric motors on the rear wheels to...
After spending over $5,000 starting in 2017, I finally achieved my dream setup.. sounds like a meteor strike when the bass hits- Running Subs at 1200W and Door Speakers at 75W each
Tried so many different setups and FINALLY:
More in-depth look:
I have a 2008 Spyder GTP....I believe the rims in back are 9.5". Currently running 265/30/19 in back and 255/35/19 in front. I believe it's dropped 2" using Super Stock springs.
Would the 305/30/19's work? It looks like there is plenty of clearance height-wise...seems that these...
Hi guys, I thought someone may be interested in this build I am currently completing. It is a Lancer (Australia) with the 4g69 engine.
After considerable research I could not find anyone who built a top-mount turbo setup, I may be wrong...but having built hundreds of turbo setups in my...
Hey guys! So I recently started to tune myself using Fastworks on my laptop. Up until now I've been on Hackish' tunes he sent me with maybe small changes but am finally diving into ignition timing and fuel. Also change mivec to 3200 which I love.
Anyways, I need a wide band but dont want to...
Didn't see a step by step so I thought I'd help out.
I did not disconnect exhaust. But you may have to depending on your setup.
Step 1 is get a jack with a piece of wood on it and support the transmission.
Step 2 is remove the rear two bolts on the centermember.
Step 3 is remove the...
Hey guys, I know there’s various posts about exhausts, and they all have great info, but I wanna start this one, mostly because it’ll be specific for my setup, and I’m sure a lot of you have experimented more with different exhausts since those threads have been made.
So I bought my third 2006...
Hello to all,
Here is my set up:
2009 Spyder V6
Injen cold air inteke
OBX long headers.
Finally installing my AEM computer (from BrianJ) add an to the Spyder.
Anyone have a basic setup i can use?
2006 Mitsubishi Eclipse GS
I am trying to install the piggy back ECU, i am looking for someone that has done this before with success for the Eclipse, the kit was design for the ralliart, the ECU Pinouts are different. I found the Pinouts on the RRM site and was told the 4 and 6 are setup the...
Hey Guys..... I have a sweet double DIN deck, amp and 15" subwoofer thats been collecting dust for a few years now. I need to either get this installed or sell it.... and am leaning towards installing. I installed systems in my old Cobalt and sunfire many moons ago, but for this install, since...
After investigating here on the boards, and from reviews, stay away from the cheap headers and exhaust on ebay combo for 271.
So I'm looking right now at the OBX headers and the magnaflow catback as the injen won't fit the GS.
I also thought would be a good idea to have them ceramic coated...
Just finished putting my new pc together.
•Cooler Master HAF 912 case
•ASRock X370 Fatality K4 mobo
•AMD Ryzen 3.5 Ghz cpu
•Corsair CX750M 750 watt psu
•G.Skill 8 gigs ddr4 3200 memory
•Cooler Master 240mm liquid Cooler
•XFX Radeon RX 580 xxx gpu
It's my first build in about six years. My...
Hey guys, I tried searching for this specific question, but I can't seem to find exactly what I'm looking for. Right now I have a muffler delete and it sounds nice, but I plan to get the OBX long tube headers soon. My question is, would the headers sound better with a straight pipe to, say, an...
I can feel my throw out bearing going out and I'm sure that the clutch that's on there is the original clutch, and I've got about 124K miles. I think it's time for a new clutch.
I don't plan on boosting or nitrous, so I imagine I don't need a clutch rated for 400HP, but at the same time, I want...
Hey guys, haven't been on this site in a while, but after asking around on the threads, I was recommended an Injen CAI for my 2006 Eclipse GT. You hear different claims, and people stating that they did get those claims or did not, but I am happy to report that the Injen CAI I just installed in...