Mitsubishi Eclipse 4G Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 272 Results
  1. 2006-2012 Eclipse (General 4G)
    So I have no idea where to go with this car. I was driving it one day and went in reverse, when I pulled out I heard a pop and it stopped engaging the gears. No smells. Clutch was done a couple months prior. The car did however start shifting a little odd before this. But not how it felt when my...
  2. 4G Eclipse GT/SE Specific
    Sorry in advance if this is in the wrong catagory, first time poster. As stated in the title I am looking for the rubber seal that prevents leaking through the top of the gear selector. I've seen a couple of ancient threads from people with the same problem but none could provide a part number...
  3. 2006-2012 Eclipse (General 4G)
    I fixed the play in my shifter completely. Managed to make a plastic spacer (43mm or 1 11/16 od, 37mm or 1 15/32 id, Width as desired) underneath the lower ball seat, to raise it a mm or so. and then dremel out the upper retainer for the pivot ball a mm as well. A clean up and regrease with...
  4. 4G Eclipse GS/SE Specific
    Having a hard time getting any info or specifics for this little bushing that goes inside this link, anyone have a link where to get one?
  5. 2006-2012 Eclipse (General 4G)
    G'day, I didn't drive my car for about 3 months and now that I'm back in it the shifter is rather tight. It has been slowly loosening up with driving but I'm curious to know if anyone has had this problem and what they did to solve it? Thanks
  6. Problem Reports
    Hello, my 06 gs 2.4L will not properly go into 4th gear. All other gears work as they should. But when I shift into 4th gear and give acceleration the gear shifter slams into the neutral position... I’ve noticed that if I granny shift into 4th gear and hold the shift knob for about 3-4 seconds...
  7. Interior and Exterior Modifications (Show)
    Installed-GT V6 6 Speed SHIFT KNOB OPTION-Potential for Shorter Shift height First Mod.....So the OEM Mitsubishi Shift knob for the GT is $140.00 (best price I could find for a new one). Started looking for OEM style options with The correct shift pattern, Compatible with the reverse lockout...
  8. Interior and Exterior Modifications (Show)
    The guy i work for can make 50mm stone sphere balls to go on a shifter. think anyone would buy something like that? I'm having him make me one out of Amethyst cause i like purple. he said there are loads of colors like blues, greens, yellows, black, crystal, and more. just didn't know if anyone...
  9. New Members Forum
    Hey, my name is Ale (pronounces all-ay) and I'm a relatively new 4G Eclipse owner. I drive a manual 2012 GS Sport and I love it. I live in the Northern Virginia area and I'm looking to get into the car scene around here. Cars are a new interest too but I'm excited and looking forward to learning...
  10. Current Car Of The Month
    Click here to vote for July's Car Of The Month! Congratulations to ROAD RENEGADE on winning COTM! Modifications Performance: RRE ceramic coated headers ST anti roll bars ES motor mounts TANABE Strut Tower Bar 3IN OD strait through exhaust Exterior: VIS Racing V speed front bumper VIS...
  11. Eclipse Performance
    Hey Guys, so I have an '09 GT, and I thought it would be smart to impulsively buy the GT Ralco Short Shifter from ACI w/o properly looking into it. After I bought it, I found out from various threads that the GT shifter wasn't as desirable for the GT (go figure). In the process, I had the GT...
  12. 4G Eclipse GS/SE Specific
    I took an old bushing mod that the older evo and dsmers made popular. Our GS has the evo 8/9/dsm bushings while the GT has the evo X bushings. Favorite mod to tie in my short shifter and BLOX style knob.
  13. 2006-2012 Eclipse (General 4G)
    I broke mine since they're plastic pieces of crap. Does anyone use anything other than the stupid stock one? Or know where to get a replacement? I know there are solid ones for other cars like the s2000 but I really want to know if the ball sizes are close enough. Anyone? :) I recently...
  14. Audio & Lighting
    I just bought a 2012 GS today. I want to switch all lights inside and outside to LEDs. Can anyone tell me what they all take and how many I would need? Including the HVAC, gauges and shifter. I keep seeing different answers on different sites. Thanks!
  15. Interior and Exterior Modifications (Show)
    Looking at some aftermarket shift knobs and can't decide on what looks best and is better than stock. So post pics of your shift knobs, lets see em! Also, was looking at some metal shift knobs, how do they "feel" in heat and cold weather...up here where i live it gets to around 30 celsius in the...
  16. 4G Eclipse GS/SE Specific
    So since I have owned my 4g eclipse for the past 3 or so months, the shifter has been stiff and giving my a weird sort of issue. When you go and sit in the car in the morning, the shifter will be "Normal" and return back to center, still relatively stiff but it does return to center. After...
  17. Tuning and Electronics
    So, as you may or may not know, Brian J developed a module several years back that allows people with automatics to use the steering wheel audio control buttons as "paddle shifters", in the sense that you would use the buttons to change gears, rather than the stock center console shifter. I...
  18. Driveline
    So I've recently installed a new shifter. One of the install instructions was "grease shifter cup/ball" but wasn't specific as to with what. I used what I had (dielectric grease) and completed the install. Either I didn't put enough, or it's not compatible, but shifts are notchy and require more...
  19. Driveline
    Trying to put my TWM shifter back together and I've run into a big problem. I can't get the pins to line up with the plastic bit that cups the ball protruding from the shifter. There's also a funny looking spring that I can't remember where it goes. Please help.
1-20 of 272 Results
Top