Search Results for ‘suspension’

Hello all. I the last month or two I noticed a small clunk in the rear of my car whenever it was cold outside and going over small bumps etc. Now even tho it's warm just driving the car around there's pops and clunks from the rear suspension. Anything common causing this? Did some research and...

Hello, I am Ian from the USA. this is my 4g, I also own a 3kgt that i am currently restoring. lowered on eBay coil overs (temporary. Looking into Further options for autox) Catback exhaust, cold air intake (heat wrapped), throttle body coolant bypass, fog light delete( for summer only), and a...

Hey Everyone. Wanted everyone to know that Boosted Fab (Boostedfabrication.com) you can now order custom Poly Engine mounts to replace the Hydraulic mount for both GS and GT. As well as the Trans mounts for the GS and GT. I'm running them both along with the Energy suspension Bushings on...

So for a while I had been feeling something that I couldn't quite describe, It felt like it was coming from the front left of the car usually would start too feel it at around 30-35mph an it would stop anywhere between 40-55mph. I first thought it was something to do with wheels/ suspension so I...

Hey everyone, I've been working with a custom engine mount fab shop out of PA called Boosted Fabrication. If you follow my IG @rennasgarage, you will have seen the custom engine mounts he made for my GS. It definitely makes the driving experience much more precise. It feels like I have less...

Does anyone have a trans mount for a 3,8L 6 speed for sale? I have the energy suspension poly bushings but when I installed it, I followed the directions not realizing the directions are for the 3g cuz it also works with the 4g 3.8 6 speed only from Auto city imports so I removed the bushing...

My name is Devin from Oxford, N.C.Retired old guy....lol and this is my First Mitsubishi, a 2007 GS. I found this site very informative as this is also my first import. I'm basically a classic and hot rod guy and feel somewhat out of my comfort zone,Hopefully this site will cure that. My...

I have a 2006 GT 3.8L that had D2 Coilovers installed on front and rear when I bought it. After taking a look at the suspension I noticed the front sway bar is not connected on either side to the coilovers- it's just sitting on the frame of the car. I know I need to get end links in order to...

Hey guys, I need some advice on what could be causing this. 2006 GT: I put on new shocks and struts last year (OEM, and yeah, that cost a lot more than aftermarket but I liked the original ride). I put new brake rotors and pads, and replaced failing front right caliper. I replaced the 17"...

I am readying myself for the next order and have come to my next ?'s I'm planning on getting energy suspension motor mounts I see they have control arm bushings are they worth getting also I want to replace the ball joints what is everyone's opinion on these MEVOTECH Complete Arm w/ Ball Joint...

KYB is currently offering a rebate on select Shocks, Struts, and Strut / Coil Spring / Mount Assemblies. Now through June 30th, 2020, buy four qualifying KYB products, and receive a pre-paid MasterCard for up to $75! KYB ride control products are vehicle specific and designed to restore or...

Looking to pick up my first set of rims. I don't know much about this whole wheels/tires/suspension thing (or modifying vehicles in any way) but I have managed to figure out stuff so far... I finally found a set of rims that interest me but I can't seem to find reviews on them ANYWHERE...

In the exploratory phase of auto to manual swap and have a few questions. The shop that's been doing my suspension has done this swap before (4G MT swapped to Galant) and is onboard to help with the install. I've following salvage titles on erepairables.com and someday will find a donor car...

Preface: I'm hoping this thread will become a gold mine for shock absorber and suspension information, so others can read experiences and advice for different builds. GROUP 33 FRONT SUSPENSION https://tearstone.com/eclipsefsm/2006_PS24S_MMNA_SM_PDF/GR00003100-33.pdf GROUP 34 REAR SUSPENSION...

Current owner 07 gt v6 automatic had one of these about a decade ago was running High 13 with automatic headers intake heat spacers some suspension however today it seems like absolutely no performance parts are available. First of all why these cars are awesome and secondly any helpful...

I recently had my '06 GS up on blocks for a while changing out brake rotors and a bunch of suspension parts. After finishing, I took it out for my first test run and noticed the radio was dead. After a few moments a "E Com" error come up on the screen. Obviously the error message and the dead...

There isn't a single build in the world like this one. This car is based on a 2nd gen Mitsubishi Eclipse platform, and was built by Full-Power-Motors racing team for the sole purpose of breaking records in the FWD category of Russia's national drag racing championship. What makes this car unique...

Roughly two weeks ago I lowered my '06 GT on Megan Racing Lowering Springs, mostly in the interest of just getting rid of factory wheel gap, and to lower the car but not far enough to completely slam it. I probably won't be racing the car but I do care for my car to have good performance on top...