Search Results for ‘tube’

I just patched the two vapor return lines that seem to rust out under that heavy steel cover. ( got the p0442 and then the p0445 ) . I see you can order the entire filler tube component, is it hard to replace if I put the car up on ramps ? Can you get to the upper filler neck hose connections...

Hi everyone, hope you all are doing well. So my 07 GT (6-speed) is experiencing two misfire codes. At first, it was P0304, so I checked the front bank of spark plugs and found the plugs and boots to be covered in oil. I changed the valve cover gasket and tube seals on those, and the code went...

With warmer temperatures finally on the way, now is the time to get your air conditioning system operating in peak condition. The RockAuto.com catalog offers A/C parts from respected manufacturers including UAC. Founded in 1988, UAC is known for high quality standards and for constantly...

Hey! So I know there's a lot of material out there on how to properly bleed your clutch, but I decided to make a guide since me and the shop that worked on my car made some stupid mistakes on it. So! While I'm doing this on a 2.4, I assume the process is the same for the 3.8. If your clutch...

Hi from Germany, can anybody measure the distance between the front upper and lower O2 sensor ! and if possible the rear too !? I have the obx long tube headers and i want to put the lower sensors back in place . Thanks for ur time. Greetz Markus

I have a 06 with approximately 70K miles on it. The car has not been driven often for the last year or so, and I do not have the time to invest in bringing this back up to speed. I'm open to working out an offer, as I need to get rid of this rather quickly. asking $3,500 located in eastern...

So, I have a Crank no start issue but everything is a okay (I've checked everything.) I've tried Starter fluid but I couldn't get the throttle body to open up so I basically sprayed it in the air tube, behind the air sensor so as not to mess with that. I held down the gas pedal but to no avail I...

Howdy, So, here is the repair guide to rebuild your power locks for around $30USD a pair. This works on ALL G4 eclipse including spyders. Always replace both motors at the same time or your locks will do strange things. Symptoms of failing actuators are as follows. Locks do not work when...

Hey guys, I tried searching for this specific question, but I can't seem to find exactly what I'm looking for. Right now I have a muffler delete and it sounds nice, but I plan to get the OBX long tube headers soon. My question is, would the headers sound better with a straight pipe to, say, an...

First, I want to thank you guys on this board, your knowledge and patience goes too often unappreciated. Guys like myself that take on repairs we have never done and maybe some of time should have never started, but your brains help get us out of many jams and more important the “boss” asking...

Hey everyone, When I was down changing my oil the other day, I noticed that one of my pipes was darn near rusted through. My friend said it was the pipe that ran from the exhaust manifold into the header tube before the cat. It's a J-shaped thing that looks like it has a metal sleeve (that's def...

I had to replace my valve cover gasket and tube seals because I found oil on my coil boots, it was most pronounced on cylinder 1. When I tightened it down, I stupidly tightened it as tight as I could (within reason) and ended up snapping a bolt. Replaced all six(?), tightened them down...

hey, my name is nick and im a full time mechanic and a part time bouncer i bought an 07 eclipse gt spyder from my buddy a couple of months ago. i helped him do a lot of the work and mods to it as well. 141k miles, 6speed MODS: K&N Typhoon Intake Throttle Body spacer Urethane suspension...

First I have a 2007 Mitsubishi Galant Ralliart and I'm sure this will work for the MIVEC V6. What I did was weld a 1/2 NPT fitting on the nut that screws the EGR tube to the header and welded another 1/2 NPT fitting to the EGR tube flange and connected them together using 12" stainless steel...

I'm looking to buy a nice pair of ripp long tubes.

Starting point. May 2015 (2021) (Aug 3rd 2016) Engine/Driveline: Evo 8 16g 10.5T Custom wastegate actuator Evo 8 3 bar MAP sensor TiAL Q blow off valve FID 1000cc injectors AEM 340lph pump Magnus fuel rail (4G63) Custom full return fuel setup (-8 feed, OEM feed as return) Turbosmart...

Gutted 3 cats no prob added CAI BIG problems So after I gutted all 3 cats life was great. I got a big hp performance boost. I put a Cai on and now I'm having trouble. I completely took all stock air input out of car. I hooked up just the vacuum tube to cai. And plugged in maf sensor. Car...

$$SOLD$$ $$SOLD$$ $$SOLD$$ $$SOLD$$ For sale, piping does have plenty of scratches on it, otherwise fully functional. Intake can be converted to short ram, or long tube. Original AEM Air Filter is very clean, and has a lot of life left on it. Sale will include original box, and AEM paperwork...