Search Results for ‘weld’

Hi Guys I have a friend who is parting an Evo (Not sure yet which Evo it is) and he offered me his muffler or axel back if i want it and weld it on my GT So question is Would that work!? And if so Which Evo should it be or any would be ok!? Last question also please Is there any parts that...

2006 Eclipse GT 3.8L V6 MT So, I have an intake and exhaust done and originally I was gonna stick to bolt-ons and leave her alone but... then a brand new turbo was gifted to me from a friend who had no use for it. So... now here we are. I have started looking into the measures I need to take...

Just picked up an '07 Eclipse GT 3.8L this past Monday and absolutley loving it. But............ Does anyone have any wireing schematics on how the fog light run. I want to make it to that my fog lights stay on even with highbeams. I cant afford to replace my headlamp housings right now they...

First I have a 2007 Mitsubishi Galant Ralliart and I'm sure this will work for the MIVEC V6. What I did was weld a 1/2 NPT fitting on the nut that screws the EGR tube to the header and welded another 1/2 NPT fitting to the EGR tube flange and connected them together using 12" stainless steel...

Alright, I have searched but couldn't find the answer to my question. I just installed headers and have an extra slot which is plugged with a bolt. However, I would like to install a wideband and wondered if there was anything that I could screw into that hole without having to weld? The...

Will a catback exhaust made for a v6 fit a 2.4l or is the piping different underneath? I have a 06 2.4l gs and i cant find a cat system under 400$ except for one, its jdm 179$ but its made for v6s an says it isnt compatable with gs... could i cut and weld it to make it fit? Or do the v6 have...

ive been trying to find an affordable cat back exhaust system to connect to my obx header on my 06 GS An i found one but it was for V6s and it says the catback exhaust system couldnt fit a gs... what is the difference in the pipeing and can i just cut the pipeing and weld it to fit ? I have a...

heres some pic from my turbo build that hackish helped me with.much respect to hackish for all the 20 hours of work he did to help me complete my build. <a href="http://s1298.photobucket.com/user/ewildoner/media/Facebook-20150205-010100_zps2bav2spy.jpg.html" target="_blank"><img...

Title sais it all. I am looking for a hks hi power mufler, the one like on gt axle back. They dont make those for gs so i will weld myself on. Thanks

So after i installed my obx long tubew headers i no loner have cats, or resonators. Or a muffler. So i had a shop weld on the test pipe and a ebay H1 muffler tip. When i rev it , it sounds horrible. What woukd be my best options for a more throtty sound?

For sale, Now this is off of my 3000gt (3.0L Twin Turbo), BUT looking at the this next to the OEM Eclipse one, They are basically the same shape, and can be EASILY modified by any exhaust shop to mount a hanger and flange to it and mount it to factory location, or if you have OBX Headers, You...

Used proflow throttle body slight crack in the edge. It should be covered up by the coupler but I would either weld it or put jb weld on it. I was taking it off the car to put on the boomba throttle body and dropped it and it split a little. 175$

I was wondering if its possible to lower your car using the factory springs but lowering the spring perch. Not sure if that is what its called, the part where the spring sits in on the strut. I was thinking about removing and lowering then re-weld the perch. I lowered my car a while back and...

Hi all, my daughter only has one key car and she went to ace to have another one made. They told her not to put it in ignition that its for door only. Her remote/key fell apart leaving only a small piece to try and turn. It was to hard so she put the non chipped key she got from ace into...

Hey I'm looking to redo my oil pan because the weld is leaking where I connected the oil return line so I wanted to see if anyone had one they would part with for cheap if not I'll just re weld the fitting.

Hey everyone so I was wondering if it's worth putting this GT megan racing exhaust on my GS, I understand I'll have to have someone cut and weld the flanges, also that it would sound very high pitched on my GS, is there a way to fix the sound? Also I imagine there will be some power loss if I...

2009+ Dual Custom Exhaust Setup I have a 2012 GSS with dual exhaust from the factory. I recently ordered 2 Aero Turbine 2525 mufflers to put on. My original idea was to fab some piping to the Y split at the back, but it looks like im going to need to just cut off the stock ones and weld on the...

So here's the deal. I just got my Eternity full bodykit and the Rear bumper has 2 mufflers holes. I was wondering.... What do I need to do. (Parts ordering) To achieve dual exhaust. I want to leave everything stock (Cat / resonator ) I just need to custom fab and put a splitter after the...

Not sure if I was a victim of vandalism or my window just separated from the soft top on it's own but thats what happened. I didn't notice my window separtated from my soft top until I was washing it one day recently. I can't afford a new top at the moment and the rain is on it's way. So I did...