Mitsubishi Eclipse 4G Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter · #1 · (Edited)
The first pics are the original car I didn't expect to do the mods that I did.
from the factory as most know the 2012 Convertible 3.8 didn't have the option of a stick so didn't do much to the engine as of this time but installed a injen cold air intake.
Next it came from the factory with a Rockford fosgate system took that out and first installed a pioneer 7 in display head unit with full JL speakers with a Sub in the trunk in the place of the spare tire all powered with a JL VX1000/5i
installed Yellow braking system 14' drilled and slotted rotors 4 piston calipers (painted Red from the Manufacture)
18 5 spoke rims and tires
LedGlow full RGB Lights under the car, Grill, wheels and interior
Aftermarket Spoiler for the fact no convertible from the factory came with a spoiler
installed a black out for the factory spoiler
installed D2 Racing Coilovers lowered the car 2 1/2 to 3 inchs
installed Eyelids to the front headlights
and to finish installed the body kit

https://www.club4g.org/board/members/cutter-albums-updated-pics-picture80447-along-time-ago.jpg

https://www.club4g.org/board/members/cutter-albums-updated-pics-picture80445-not-same.jpg

https://www.club4g.org/board/members/cutter-albums-updated-pics-picture80443-before-all-mods.jpg

https://www.club4g.org/board/members/cutter-albums-updated-pics-picture80431-20191005-155932.jpg

https://www.club4g.org/board/member...pics-picture80429-img-20191005-160049-066.jpg

https://www.club4g.org/board/members/cutter-albums-updated-pics-picture80427-20191004-181424.jpg

https://www.club4g.org/board/members/cutter-albums-updated-pics-picture80425-20191004-191144.jpg

https://www.club4g.org/board/members/cutter-albums-updated-pics-picture80423-img-20191109-120731.jpg

https://www.club4g.org/board/members/cutter-albums-updated-pics-picture80421-20191005-155752.jpg

https://www.club4g.org/board/members/cutter-albums-updated-pics-picture80643-20200102-181536.jpg

https://www.club4g.org/board/members/cutter-albums-updated-pics-picture80641-20200117-170934.jpg

https://www.club4g.org/board/members/cutter-albums-updated-pics-picture80639-20200102-181343.jpg
 

·
Super Moderator
Joined
·
341 Posts
I wanna do my top black once I replace it, but a top replacement is so expensive, and some veteran car enthusiast say replacing a top should always be left to the pros. I can find the original material top for $400 but the install is like $1100......

Update almost a year later: Top was replaced by me, actual top was ~$400, installing it wasn't too bad, looks great.
 

·
Registered
Joined
·
20 Posts
Discussion Starter · #4 ·
Looks like some time went by with the COTM so going to repost see if ghost can get it.
 
1 - 4 of 4 Posts
Top